HCPL-5430#200

Data Rate:	40Mbps
Supplier Device Package:	8-DIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 125°C
Voltage - Supply:	4.75 V ~ 5.25 V
Current - DC Forward (If) (Max):	10mA
Voltage - Forward (Vf) (Typ):	1.35V
Rise / Fall Time (Typ):	15ns, 10ns
Propagation Delay tpLH / tpHL (Max):	60ns, 60ns
Series:	--
Current - Output / Channel:	25mA
Output Type:	Push-Pull, Totem Pole
Input Type:	DC
Common Mode Transient Immunity (Min):	500V/µs
Voltage - Isolation:	1500VDC
Inputs - Side 1/Side 2:	2/0
Number of Channels:	2
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HCPL-5430#200 Optoisolators - Logic Output Application Field and Working Principle

Optoisolators - Logic Output are a type of digital integrated circuit (IC) which helps to create systems with electrical isolation that offer improved safety and longer life expectancy. The HCPL-5430#200 is a high speed Optoisolators - Logic Output with Zero Cross Detector and is widely employed in many applications.

What is HCPL-5430#200?

HCPL-5430#200 is a family of digital ICs. This Logic Output has a high speed Zero Cross Detector (ZCD) built in. The device is capable of operating up to a maximum frequency of 2 MHz, with a typical rise/fall time period of less than 1.4 μs.The chip also features an Enhanced ESD Rating of 8kV. By integrating the device into your system, it can help to remove coils, buzzers, and capacitors to further reduce noise and cost. Compared to other logic level circuits, the Zero Cross Detector performs with enhanced response.

Application Field and Working Principle

The HCPL-5430#200 Optoisolators - Logic Output is widely employed in various different applications and systems, including:

• Signal conditioning to filter electronic noise from power lines and TFT displays;
• Power factor control in switching power supplies;
• Motor speed control in AC drive systems;
• Lighting control systems;
• Security systems.

In terms of its working principle, the device acts as an interface between an input stage and an output stage, thus providing electrical isolation and protection against short circuits or power surges. A logic high level signal is detected and a logic low level signal is outputted. The device includes an opto-coupler based on a light-emitting diode (LED) and a photosensing element. The LED is triggered upon receiving the logic high input signal from the input stage. This creates a short circuit across the LED and the photosensing element. When the input falls, the LED’s current is shut off.The device features Zero Cross Detection. When the LED switches on and off, a message is sent to the output stage that the input has crossed the zero level. The output stage then changes its state accordingly from logic low to high or logic high to low.The use of an opto-coupler allows the output stage to remain isolated from the input stage. This reduces the risk of power supply and ground loop problems occurring in systems without optoisolators.

Benefits of HCPL-5430#200

The HCPL-5430#200 Optoisolators - Logic Output offers superior isolation while also managing to reduce power loss. This allows systems to enjoy increased power savings. The device also provides good thermal performance and requires minimal operating current, providing more reliable performance.The HCPL-5430#200 is also RoHS compliant, helping to meet environmental regulations and standards. Its enhanced ESD rating reduces the chances of damage from electrostatic discharge currents and its Zero Cross Detector allows for improved response.Overall, the HCPL-5430#200 Optoisolators - Logic Output provides high-performance electrical isolation in order to create safe and cost-efficient systems. With its array of features, the device is certainly well suited to a variety of different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description