HCPL-814-300E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices that provide electrical isolation between two circuits using light. The HCPL-814-300E belongs to the family of optoisolators with transistor photovoltaic output (TOPs). This type of optoisolator is used to provide electrical isolation between low-level control signals and the higher-power circuit they are controlling. Optoisolators are particularly useful for applications where a low-power signal needs to be isolated from the logic or power circuit it is controlling. For example, motor controllers, power supplies and other high voltage/high power applications may use optoisolators for increased safety and isolation of the control logic signals.

The HCPL-814-300E is a wide-bandwidth, high-speed optoisolator. The device consists of a photovoltaic diode and an NPN switching transistor. When a light source is applied to the photodiode, the photodiode starts to conduct current, supplying the base current of the switching transistor. This turns on the transistor, allowing current to flow between the collector and emitter terminals of the transistor. The output can be used to perform switching operations on higher voltage or power circuits.

The primary application of the HCPL-814-300E is in motor control. The isolator provides electrical isolation between the control logic and the high-voltage motor circuit, eliminating the possibility of arcing or other hazardous electric discharges. This isolator also allows the control logic to be safely operated at a lower-voltage/lower-power level. In addition to motor control applications, the HCPL-814-300E can also be used in other applications such as power supplies, instruments, and industrial controllers.

The HCPL-814-300E has a wide bandwidth of up to 6MHz. This makes it suitable for fast data transmission applications. In addition, the device has a low input current of 3mA, making it ideal for low-power/low-voltage applications. The maximum collector-emitter voltage is 10V, and the collector current is limited to a maximum of 500mA.

The HCPL-814-300E optoisolator is a widely used, reliable, and robust device. It is robust enough to be used in high-voltage/high-power circuit applications, and its wide bandwidth and low input current make it suitable for fast data transmission applications. This optoisolator is a great choice for isolation applications that require high-speed data transmission and electrical isolation between low-level control signals and the higher-power circuit they are controlling.

The specific data is subject to PDF, and the above content is for reference