HF2836-182Y4R0-T01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes are a type of inductor specifically designed to filter the power lines and reduce electromagnetic interference. HF2836-182Y4R0-T01 is a common mode choke featured by high inductance, low resistance and high SRF (Self Resonant Frequency). It is mainly used in various passive devices for signal filtering or EMI/RFI noise reduction.

A common mode choke consists of two coils arranged in a parallel configuration and wound in opposite directions with opposite magnetic polarities. The physical arrangement allows the choke to reject the common mode frequencies while passing the desired differential mode frequencies. The common mode choke works by creating a magnetic field around the coil when AC current passes through it. The magnetic field generated in the choke causes a voltage drop across the coils, which is dependent on the frequency. This process is used to selectively allow or block certain frequencies from passing through the choke while others are unaffected.

The performance of HF2836-182Y4R0-T01 is mainly determined by the number of turns of the windings, the type of core material, and the frequency range it is designed to operate in. It is designed to operate in a wide frequency range of up to two hundred MHz. In addition, the high SRF of this common mode choke is greater than one hundred MHz, which helps to achieve higher filter performance. The inductance of HF2836-182Y4R0-T01 is forty-five uH (micro henry). The rated current is three A and the DCR is up to ninety ohms. It\'s designed for high voltage and high current usage with high inductance.

HF2836-182Y4R0-T01 is mainly used in automotive and telecommunication application areas. It is suitable for noise suppression in automotive electrical systems, such as DC motors and solenoids. In telecommunication, it boosts the signal transmission in low noise environments while filtering out high frequency noises that may interfere with the signal. It is also used in various other applications such as consumer electronics, medical equipment, and other applications which require noise suppression.

The HF2836-182Y4R0-T01 common mode choke is used to reduce conducted emission noise in a wide range of applications, from automotive and telecommunication to consumer and medical applications. Its performance is mainly determined by the number of turns of the windings, the type of core material, and the frequency range it is designed to operate in. It is designed to operate in a wide frequency range of up to two hundred MHz. In addition, the high SRF helps to achieve higher filter performance. With its high inductance, low resistance and high SRF, the HF2836-182Y4R0-T01 common mode choke can provide a cost-effective solution for noise reduction applications.

The specific data is subject to PDF, and the above content is for reference