HFA08SD60S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are widely used components in many electrical applications such as rectification, voltage regulation, switching, signal processing and more. They are also used to protect circuits from over-voltage or over-current. The diode most commonly used for rectification is the single diode. The HFA08SD60S is a single diode used for several applications from low voltage to high voltage power rectification. The following article will discuss the application field and working principle of the HFA08SD60S.

The HFA08SD60S is a low cost, full silicon controlled rectifier (SCR) with a current rating of 8 Ampere (800 mA). It is a non-polarized device, meaning that its pins do not need to be connected in a particular way. It is suitable for applications such as power supply rectification, transformer rectification and other high switching applications. The device has a low on-state voltage drop and is capable of handling continuous and peak currents.

The operating temperature range of the device is -30 to +155°C. It has an on-state RMS current of 8 Ampere, with a max peak forward current of 8.5 Ampere and a peak reverse current of 20 mA. The forward voltage drop is 1.3 V for the 12V device and 1.7V for the 20V device. It has a reverse voltage break-down of 24V for the 12V device and 28V for the 20V device.

The HFA08SD60S is a single-phase, dual-controlled, four-terminal (SCR) device. This device is formed from two series connected three-layer gate structures. Each gate is equipped with a single gate terminal operation, which is dedicated to controlling the gate current. The gate terminals are labeled Gate A and Gate B, while the other two terminals are called Anode and Cathode.

The working principle of the HFA08SD60S is that of a rectifier. A rectifier is a device which is able to convert alternating current (AC) to direct current (DC). It does this by allowing the current to flow in one direction and blocking the current from flowing in the other direction. The rectifier system of the HFA08SD60S is comprised of a single diode, which is connected in series between the Anode and Cathode. When an AC voltage is applied to the Anode and Cathode, the diode is forward biased, allowing the current to flow in one direction (from the Cathode to the Anode). The current is then rectified, meaning that it is changed from an AC waveform to a DC waveform. The voltage can then be regulated as required, depending on the application.

The HFA08SD60S is an ideal device for applications requiring high-speed, low-power rectification. The device is also suitable for applications such as power supplies, motor control and UPS systems. Its low on-state voltage drop and low forward voltage drop helps to reduce power loss and reduce system costs. The device is also highly reliable and resistant to thermal runaway. This makes it suitable for applications that require long operating life and long term reliability.

The HFA08SD60S is a versatile, low cost rectifier that is suitable for a wide variety of applications. Its low on-state voltage drop and low forward voltage drop ensures efficient operation and reduces system costs. Its high current ratings and high-speed switching capability makes it ideal for applications that require fast response times. HFA08SD60S is a reliable, cost-effective solution for single-phase rectification requirements in a variety of circuits.

The specific data is subject to PDF, and the above content is for reference