HMC410MS8GE

Series:	--
Packaging:	Cut Strip
Part Status:	Obsolete
RF Type:	VSAT
Frequency:	9GHz ~ 15GHz
Number of Mixers:	1
Gain:	--
Noise Figure:	8dB
Secondary Attributes:	--
Current - Supply:	--
Voltage - Supply:	--
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package:	8-MSOPG
Base Part Number:	HMC410

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The HMC410MS8GE is a low-noise RF mixer from Hittite Microwave Corporation. It is specifically designed for use in ultra-wideband bandwidth applications and features excellent noise figure, low harmonic distortion, and improved phase noise. In this article, we will discuss the application field as well as the working principle of the HMC410MS8GE.
Application Field

The HMC410MS8GE is normally utilized in ultra-wideband systems. It is capable of handling a wide frequency range from 0.02GHz up to 8GHz, making it ideal for use in many different applications. These include point-to-point communication systems, public safety, and military communication systems, among others. In addition, the HMC410MS8GE is also suitable for use in satellite communication links, mobile radio systems, software-defined radios, and base stations.
Working Principle

The HMC410MS8GE is an RF mixer, which is used to convert a signal of a particular frequency into another. This is accomplished through the use of a mixer topology, wherein two signals of different frequencies and phases are combined in order to produce an output signal of the desired frequency. This type of mixer uses a device or circuit with two input ports, each of which is connected to a separate source of energy. The outputs of these input ports are combined at the output port of the mixer. The output signal is the sum frequency of the two input signals.
The HMC410MS8GE is an up-converting active mixer, which uses two active devices, as well as two tuned circuits, to obtain the desired frequency output. The two active devices are a pair of strip-line field-effect transistors (FETs), which serve as voltage-controlled current sources. These FETs are used to convert the two input signals into an unbalanced signal with two sources, one being the lower frequency source and the other the higher frequency source.
The two tuned circuits consist of an inductor and a capacitor connected in parallel. The inductor is typically resonated to the lower frequency and the capacitor is resonated to the higher frequency. The two tuned circuits serve to reduce the input noise and improve the matching of the circuit.
The HMC410MS8GE is capable of providing broadband performance from a few hertz up to 8GHz, without compromising the signal-to-noise performance. This is achieved by using slow FETs and tuned circuits. Another advantage of the HMC410MS8GE is that it is capable of providing low harmonics for signals up to 6GHz.
Conclusion

In conclusion, the HMC410MS8GE is a low-noise RF mixer designed for use in ultra-wideband applications. It is capable of providing broadband performance from a few hertz up to 8GHz, with excellent noise figure, low harmonic distortion, and improved phase noise. In addition, the HMC410MS8GE is also suitable for use in mobile radio systems, public safety systems, and military communication systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description