HS1BL M2G

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	950mV @ 1A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	50ns
Current - Reverse Leakage @ Vr:	5µA @ 100V
Capacitance @ Vr, F:	20pF @ 4V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	DO-219AB
Supplier Device Package:	Sub SMA
Operating Temperature - Junction:	-55°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
HS1BL M2G is a single-phase bridge rectifier. M2G rectifiers feature a low forward voltage drop (lift-off voltage),high surge current capability and fast switching speeds. They also have a high-dv/dt temperature condition (High Thermal Stability). This makes them ideal for applications such as AC-to-DC converters, consumer electronic power supplies, and power factor correction equipment.The main components of the HS1BL M2G single-phase bridge rectifier consist of two connecting terminals, two diodes, and two resistors. The bridge is composed of two diodes and two resistors connected between the two connectors. The two diodes are arranged in a synchronous arrangement and the resistors are connected in series with the diodes.Working Principle
The HS1BL M2G single-phase bridge rectifier operates on the same principle as a full-wave rectifier. A full-wave rectifier consists of four diodes arranged in a bridge-like formation between two input connectors and two output connectors. During AC operation, the diodes in the bridge will conduct alternately depending on the polarity of the source voltage. The alternating current through the bridge is then converted to a direct current, with both positive and negative value pulses. The bridge rectifier will filter the output pulses and convert them into a steady direct current, which is then sent to the load. The main purpose of the two resistors in the single-phase bridge rectifier is to limit the surge currents that occur when the diodes switch on or off. The two resistors also act as additional components in determining the output voltage. The input voltage determines the peak current, which is then filtered and regulated by the resistors. The two resistors will also provide a bias voltage for the diodes, which will help the diodes switch on and off faster. Applications
HS1BL M2G single-phase bridge rectifiers are used in a variety of applications, such as AC-to-DC converters, consumer electronic power supplies, and high power factor correction equipment. They are also used in automotive applications, such as starter motors and battery chargers, as well as in various industrial applications.In an AC-to-DC converter, the single-phase bridge rectifier will convert the AC input voltage to a DC output voltage. In a power supply, the single-phase bridge rectifier will provide a steady DC current for the device, allowing for more efficient and reliable operation. In a high power factor correction system, the single-phase bridge rectifier will act as an active element, providing the necessary reactive power for reducing the total harmonic distortion (THD) of the system.Conclusion
The HS1BL M2G single-phase bridge rectifier is an efficient and reliable device for converting AC voltages to DC voltages. It operates on the same principle as a full-wave rectifier, with two connecting terminals, two diodes, and two resistors. The main purpose of the two resistors is to limit the surge currents that occur when the diodes switch on or off, as well as provide a bias voltage for the diodes. The HS1BL M2G rectifier can be used in a variety of applications, such as AC-to-DC converters, consumer electronic power supplies, and high power factor correction equipment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description