HS3FB R5G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are fundamental components of the electrical and electronics industry, found in virtually all kinds of switching circuits and devices. Rectifiers, in turn, are a special subclass of diode, which are designed to convert alternating current to direct current. Single rectifiers are further subcategorized as having either an anode or cathode terminal. The HS3FB R5G single rectifier is a rectifying device with an anode terminal.

The HS3FB R5G is a 1.5A, 600V, 3-pin, non-junction silicon rectifier with a wide range of applications. It is suitable for high-power general-purpose rectification, as well as for a variety of electronic and switching applications such as voltage regulation, power management, low-frequency switching, and high-frequency rectification. This device is particularly well-suited for use in applications where a low forward voltage drop and/or high surge handling capability are required.

The HS3FB R5G is structurally and functionally composed of a denoted cathode, an anode and a triggering gate. The current flow between the cathode and anode is determined by the mechanism in which the gate triggers the device to “on” or “off”. During its "on" state, a large electric field exists at the junction of the anode and cathode, allowing current to flow. During its "off" state, the electric field is in a very low operating voltage range, causing current to be blocked.

In addition to its on/off functionality, the HS3FB R5G also provides a level of control over the conduction and blocking of currents. With the device in its “on” state, it can be forced into its “off” state either by reducing the gate voltage to below a given threshold or increasing the current through the device beyond a certain amount. This allows for both current flow and protection from reverse current flow. The device can also be used in high voltage switching applications, as it is rated up to 600V.

The HS3FB R5G can be used in several combinations to form a complete rectifier. A single-diode rectifier is formed by connecting the anode and cathode with a diode, while a double diode rectifier is formed by connecting a diode from the anode to the trigger terminal and another from the trigger terminal to the cathode. A full bridge configuration uses two separate HS3FB R5G’s connected bridge-style. It also allows for a more efficient process of alternating current to direct current conversion.

For applications where the speed of response is a priority, the HS3FB R5G can be combined with a Schottky diode. This combination enhances the dynamic characteristics of the rectifier, by reducing the amount of current required to turn the device on and off, as well as reducing the amount of switching noise generated during operation.

The HS3FB R5G is an excellent choice for applications requiring fast and efficient conversion of alternating current to direct current. Its ability to provide current flow and protection from reverse current flow, as well as its ability to be used in high voltage switching applications make it a versatile device for a variety of applications.

The specific data is subject to PDF, and the above content is for reference