ICL7662CBD+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ICL7662CBD+T is a member of Intersil’s family of Low Dropout (LDO) switches and switching regulator controllers. As such, it can be used to produce regulated, low voltage (up to 5 volts) output from low voltage sources such as batteries. It is a two terminal device with a monolithic P-channel FET as an internal switch and a low current transconductance amplifier as an error amplifier. As a power management IC (PMIC), the ICL7662CBD+T can be used both as a DC-DC converter (switching regulator) and as a linear regulator depending on the application.

When used as a DC-DC converter, ICL7662CBD+T is typically used to generate 5 volts from a 3.3 volt or 3 volt input (or from a higher input). The ICL7662CBD+T combines the low drop-out voltage of an LDO with the high efficiency of a switching regulator, making it a good choice for power management applications. The device also supports output-voltage tracking, allowing for the delivery of a regulated output voltage even if the input voltage varies.

The ICL7662CBD+T includes an internal shutdown, frequency compensation and output voltage control. It supports two output voltages and can be configured to operate in either a buck or boost mode. In buck mode, the output voltage is set by an external resistor divider and the output is regulated by the peak current through the external MOSFET switch. In boost mode, the peak current through the external MOSFET switch is regulated by the external resistor divider and the output voltage is set by the Vref pin. The ICL7662CBD+T also features soft start and frequency foldback, which help reduce input and output ripple.

The ICL7662CBD+T is most suited for portable applications that require a low power and high efficiency power supply. It can be used for powering portable devices such as tablets, smartphones and other battery powered devices. It is also suitable for applications that require a low noise supply as its low AmpIR drop-out voltage and low quiescent current draw minimize the noise and power loss in low power applications. The ICL7662CBD+T can also be used in automotive applications due to its low drop-out voltage, reverse battery protection and high power efficiency ratings.

By improving the current flow, it effectively increases the voltage output across the load. Internally, the switching regulator consists of three parts; an error amplifier, a logic circuit and an output FET switch. The logic circuit is controlled by three main signals: the input voltage, the output voltage, and the feedback signal from the error amplifier. The error amplifier measures the difference between the input and output voltages and then adjusts the gate voltage to the output FET switch.

The output switching FET is turned on (or off) by the logic circuit which determines when the switch needs to be ON or OFF based on the error amplifier\'s feedback. When the switch is turned ON, the voltage across the switch is boosted until the error amplifier\'s feedback level is reached. At this point, the logic circuit turns off the switch and the system enters the Hold mode, supplying the required regulated voltage. The ICL7662CBD+T can also operate at higher frequencies to reduce power losses.

With its combination of features and performance, the ICL7662CBD+T is rated as one of the best PMICs for voltage regulation and power management applications. Its ability to provide efficient and accurate voltage regulation makes it an ideal choice for portable and automotive applications where power efficiency is of paramount importance. It is also a cost-effective alternative to other switching voltage regulators due to its low on-resistance, high power efficiency and temperature stability.

The specific data is subject to PDF, and the above content is for reference