IDT72P51769L5BB8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IDT72P51769L5BB8 is a specialized integrated circuit (IC), designed to be employed as part of embedded systems’ management structures. It is an 18-bit shift register output port intended for generating control and data paths for communication. The integrated circuit processes data movements and control signals, making it a versatile addition to existing integrated circuits. This article discusses the application field and working principle of the IDT72P51769L5BB8.

The most essential application of the IDT72P51769L5BB8 is in digital signal uses. It can be used as a pass-through for digital data and as general signal conditioning for signal-processing functions. It offers a range of signal manipulation options that can be used for multiple operations on a single cable. For example, the IDT72P51769L5BB8 can be used to control signal transformation, signal level conversion, signal conditioning and signal transmission, even across multiple busses.

In addition to signal processing, the IDT72P51769L5BB8 can also be used to create and manage control buses. It features a bidirectional bus interface with an input port, consisting of 16 data lines and two control lines, enabling pairs of peripherals to be connected and controlled in an orderly fashion. This feature is useful for managing multiple external devices and for linking devices for sharing control data.

The IDT72P51769L5BB8 also enables data buffers to be managed efficiently. It integrates a 16-bit data register, allowing data from the port lines to be stored and retrieved quickly, making it an effective storage solution for data intensive operations. Furthermore, it can be used as an operator of external DMA (Direct Memory Access) devices to permit orderly data flow between the controller and the daughter board.

The IDT72P51769L5BB8 includes a range of features that enable it to manage data manipulation operations efficiently. It can be used as a receiver, a transmitter, or both. When used as a transmitter, it can transmit data patterns, control signals, or both. Additionally, it can act as an encoder or decoder and can configure data according to output port. It also offers flexibility in terms of data manipulation, with the ability to store and manipulate data in byte, word, or eight-bit formats.

In order to understand the working principle of the IDT72P51769L5BB8, it is important to look at the general architecture of its design. The IDT72P51769L5BB8 works with a three-port design, featuring a control port, data port, and the output port. The control port enables the user to access the status and control registers and set their states. The data port functions as a read/write port, which can be used to send and receive data between the chip and external memories. The output port consists of 18 output lines, which can be used to generate control and data paths.

The IDT72P51769L5BB8 features a synchronous architecture, meaning that it works by using signals from the three ports to synchronize its operation. The pins of the control and data ports are connected to the clock pin, acting as the main clock source of the chip. Once the synchronous clock signal is issued, the IDT72P51769L5BB8 responds by reading or writing data to or from its ports, performing the tasks for which it was programmed.

The IDT72P51769L5BB8 is a specialized IC, which can be used to manage data manipulations, control tasks, and data transmission of digital systems. Its bidirectional bus interface and wide range of features make it a valuable tool for embedded systems that require reliable data manipulation. With its ability to perform multiple operations on a single cable, the IDT72P51769L5BB8 is a versatile and powerful solution for managing digital data and control systems.

The specific data is subject to PDF, and the above content is for reference