IDT72V3682L15PFGI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IDT72V3682L15PFGI is a versatile memory device categorized as a First In First Out (FIFO) that is part of the IDT family of Logic products. IDT is an American-based global provider of high-performance, low-power semiconductor solutions.

Designed for a wide range of applications, the IDT72V3682L15PFGI provides a comprehensive solution for buffering data, storing bytes or words, and pipelining address and data signals. This FIFO is available in capacities of 2K x 16-bits and 4K x 8-bits. It features a 15-bit FIFO depth, 6-bit bus width, and 64-byte burst size, making it suitable for support of communication protocols, industrial and diagnostic test equipment, and control systems.

The IDT72V3682L15PFGI is built on a CMOS logic process, allowing for low power operation, which minimizes power usage. The device\'s FIFO is constructed form a dual-port memory array, and it\'s capable of bidirectional data transfers, allowing for actual direction control when there is a need for more than one port. This FIFO also provides an optional depth status flag output feature that allows the user to be monitoring full or empty flags.

Aside from the features mentioned, the IDT72V3682L15PFGI also supports the following protocols: SPI, I2C, Serial, Memory Mapped, and Logic-Level Interfaces. It provides an I/O that is between 0.35 V and 3.6V and with data retention levels of up to 10 years as well as low power sleep mode support.

In terms of its working principle, the FIFO is designed to store a set of data, allowing for a steady stream of transfers. Data is written sequentially into the FIFO, and the same data is read and retrieved in the same order it was stored. Only a limited amount of data can be written and read from the device at a time, so that the FIFO can buffer a steady stream of data. The FIFO has two main parts that enable data to be transferred between two devices: the read and write. The read enable signal is used for both reads and writes, where the write enable signal is used for readings. When both the read enable and write enable signals are enabled, the device will transfer data between the two ports.

Overall, the IDT72V3682L15PFGI is a great device to help buffer and store data with a reasonable accuracy and reliability. It is versatile and not overly complicated to use and understand, with features that support a wide range of applications. It has a great variety of models available that allow for better scalability and efficiency depending on the task that needs to be completed.

The specific data is subject to PDF, and the above content is for reference