IDT74FCT540CTPYG8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IDT74FCT540CTPYG8 device is a common integrated circuit from the family of logic buffers, drivers, receivers, and transceivers. It is a member of the FCT540 family of devices produced by Integrated Device Technology; they are high-speed, low-skew, 3-state, octal bus transceivers. It can be used in systems needing to transfer multiple bits of data at one time, with two sets of pins that are equivalent, one for sending data (output) and one for receiving data (input).

Application Field

IDT74FCT540CTPYG8 devices are typically used in applications requiring the transfer of data from one location to another, such as from a microprocessor or other type of controller to an external device such as an integrated circuit. It is also suitable for applications needing very high data transfer rates due to its fast operating speed. It is ideal for applications that require multiple-bit data bus transfers including LANs, ISAs, VMEs, and buses for high-speed communication and networking. Some applications include:

• LANs – Local Area Networks
• ISAs – Industry Standard Architectures
• VMEs – Virtual Memory Extensions
• Differential and single-ended bus systems.
• Complex logic systems
• High-speed data communication

Working Principle

The IDT74FCT540CTPYG8 device operates under the principle of bidirectional data flow. This means that data can be either sent from one point (output) to another (input) or vice versa. The device is designed to transmit 8-bit data in parallel and can be used for a variety of applications including transferring multiple-bits of data at one time. It has two pins for each bit of data that are equivalent, one output set for data transmission and one input set for data reception. The device operates in 3-state, which means that there are both Hi-Z (high impedance), VOH (high voltage) and VOL (low voltage) output states available. The device also includes a fast reset input pin (FRSb) that can be used to initialize all outputs of the device to their Hi-Z state, allowing the device to be reset in a single clock cycle.

The device features 4 differential signal pairs (TX+, TX-, RX+, RX-) that can be used for transmitting and receiving serial data at high rates over short distances. It can also be used to implement differential clocking, which increases the noise immunity of the transmitted signal. The differential signal networks coupled with the data interface pins provide the ability to transfer data at high speed while reducing noise emissions.

The device has a selectable operating mode allowing the user to choose between two signal formats: TTL (Transistor-Transistor Logic) or open-collector type. Depending on the operating mode, the user can select between two different output totem-pole structures: a symmetrical totem-pole output structure or a two-level output structure. The device also includes internal control logic that can be used to enable the device, select the active power down state, and select the active power up state.

The device has a high-output drive capability of ±24mA, allowing it to continuously sustain data transfers at high speeds over long distances and reduce cross-talk between signal lines. It also has high input/output capacitance, which helps reduce noise and signal degradation.

The IDT74FCT540CTPYG8 device is an octal bus transceiver that offers the user a combination of high-speed, low-skew, and low-power features ideal for multiple-bit data bus transfers. It is suitable for applications needing to transfer data at high rates, with high noise immunity and low power consumption. This device is also suitable for applications needing low-skew operation and is available with a wide range of operating modes to meet various system requirements.

The specific data is subject to PDF, and the above content is for reference