IDT74FCT3807PYI8

The IDT74FCT3807PYI8 is a two-input high-speed, low-skew differential buffer/driver that has been designed to meet the needs of a wide range of clock and timing applications. This IC is part of the FCT family of clock/timing solutions offered by IDT and is classified as a clock buffer/driver because it can be used to drive a differential signal output and can provide a variable output clock signal that is relative to an input clock signal. The device is typically used to drive differential signals such as LVDS, CML, HCSL, and LVPECL, which are necessary for a wide range of clock/timing applications.

The IDT74FCT3807PYI8 has a simplified architecture for optimal performance in high-speed clock/timing applications. It consists of two clock inputs that are each configured to receive a signal from a differential source (in this case, the FCT3807PYI8 is configured to receive two inputs from either two differential sources or two single-ended sources). The clock inputs then drive a differential signal back out of the device to the load, allowing for an adjustable output frequency relative to the clock input frequency. The device also has two outputs (A and B) that are individually adjustable by a single control line, allowing for a configuration with different frequency outputs relative to the clock input.

The IDT74FCT3807PYI8 has several features that make it suitable for a wide range of clock/timing applications. The device’s low-skew output enables low-jitter clock distribution in systems where jitter is critical. It also has very low propagation delay (6.5ns max@3.3V) and has an operating temperature range of -40 to +85C. Furthermore, the device has a slew rate of 10V/ns and a low on-chip impedance of 9 ohms. In addition, the IDT74FCT3807PYI8 is available in a wide range of output configurations, allowing it to be used in a variety of clock/timing applications.

The IDT74FCT3807PYI8 is suitable for use in a variety of clock/timing applications, including system synchronization, wide area network synchronization, embedded system clock distribution, local area network clock expansion, and medical imaging. Additionally, the device can be used in applications such as video timing, backplane synchronous timing, and clock de-skew. In addition, the IDT74FCT3807PYI8 is suitable for use in automotive systems where a differential signal output is often required.

The IDT74FCT3807PYI8 is designed to provide a high-speed, low-skew differential buffer/driver for clock/timing applications. It has two input pins that accept either differential or single-ended signals, two adjustable outputs, and low on-chip impedance. The device is available in a wide range of configurations and offers adjustable slew rate, propagation delay, and output frequency. Additionally, the IDT74FCT3807PYI8 offers low-jitter clock distribution and is suitable for a variety of clock/timing applications.