IP4064CX8/LF/P,135 Filters

Resistance - Channel (Ohms):	47, 100
Height:	0.028" (0.70mm)
Size / Dimension:	0.056" L x 0.056" W (1.43mm x 1.41mm)
Package / Case:	8-WFBGA, WLCSP
Mounting Type:	Surface Mount
Voltage - Rated:	--
Applications:	Data Lines for Mobile Devices
Operating Temperature:	-35°C ~ 85°C
ESD Protection:	Yes
Values:	R = 47 Ohms, 100 Ohms, C = 17pF (Total)
Series:	--
Attenuation Value:	--
Center / Cutoff Frequency:	--
Number of Channels:	3
Technology:	RC (Pi)
Filter Order:	2nd
Type:	Low Pass
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IP4064CX8/LF/P,135 is an element in EMI/RFI Filters (LC, RC Networks). EMI/RFI filters are passive electronic components, typically consisting of two or more indivdiual elements, between which direct current (DC) or low-frequency radiofrequency (RF) signals can pass and which attenuate higher frequency signals. Furthermore, some filters also block entire waveforms while allowing certain frequencies to pass. In this article, the application field and working principle of IP4064CX8/LF/P,135 will be discussed.IP494CX8/LF/P,135 is a raw inductor which provides basic EMI/RFI noise applications. It provides an IEC 61000-4-2 Level 4 performance - electrical energy transients with peak currents of up to 8 A and durations of up to 50000 µs. It can be used as part of filter, or filter-passive circuits for EMI/RFI noise suppression, including switching power supplies, audio amplifiers, instrumentation, and signal lines. Additionally, it can also be used in cellular base station fields, especially to meet the requirements of the US\' Federal Communications Commission (FCC) and Europe\'s European Telecommunications Standards Institute (ETSI). The IP4064CX8/LF/P,135 device uses a tin-plated copper winding, which provides reliable electrical and mechanical properties. The copper winding can reduce the effect of electrical noise, reduce the interference of EMI/RFI noise, and ensure the signal transmission effect. Additionally, the device also produces a low-resistance inductor, which has a low-resistance property. Thus, it can reduce power loss and improve power efficiency.In terms of its working principle, IP4064CX8/LF/P,135 utilizes an integrated EMI/RFI filter network to effectively reduce high frequency noise to an acceptable level. The device features an insulated lamination, which can effectively separate and organize the filter networks. Moreover, the filter helps in dissipating the energy generated by the higher frequency signals through its heat-dissipating components. Additionally, the device also features an integrated ferrite bead core together with a capacitor, which acts as a low-pass filter and helps in further suppressing the higher frequency signals. Thus, this device helps in minimizing the interference of EMI/RFI noise to ensure reliable signal transmission.In conclusion, IP4064CX8/LF/P,135 is an element in EMI/RFI Filter (LC, RC Networks). It is a raw inductor, providing International Electrotechnical Commission (IEC) 61000-4-2 Level 4 performance - electrical energy transients with peak currents of up to 8 A and durations of up to 50000 µs. It features a tin-plated copper winding, which provides reliable electrical and mechanical properties and a low-resistance inductor, which has a low-resistance property. The device utilizes an integrated EMI/RFI filter network and its capacitor, together with a ferrite bead core, help in dissipating the energy of the higher frequency signals, which ultimately helps in suppressing higher frequency signals and minimizing interference of EMI/RFI noise. Therefore, it is suitable for use in switching power supplies, audio amplifiers, instrumentation, signal lines, and cellular base station fields.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description