IP4052CX20/LF,135

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are used to limit EMI and RFI noise generated by electrical and electronic equipment. High frequency noise generated by the equipment can degrade the operation of other equipment connected to the same power supply. EMI/RFI filters are used to reduce the level of the noise before it goes on the supply line. This article will discuss the application field and working principle of the IP4052CX20/LF,135 EMI/RFI filter.

EMI/RFI filters are most commonly used in industries such as automotive, industrial, medical, and aerospace. The IP4052CX20/LF,135 EMI/RFI filter is specifically designed for low frequency applications, and it is suitable for use in military, aerospace or ground vehicles applications. The filter has a low profile, and it is designed to be integrated into enclosed systems such as power supplies, motor controllers, and lighting systems.

The working principle of an EMI/RFI filter is based on the concept of impedance matching. The filter operates by introducing an impedance mismatch into the circuit that attenuates the EMI and RFI signals. The filter uses a combination of inductors and capacitors to form a low pass LC network. This LC network acts as a resistor to high frequency signals and allows only low frequency signals to pass through. The filter also uses a combination of capacitors and resistors to form an RC network. This RC network acts as a filter for the low frequency signals, allowing them to pass through while blocking the high frequency signals.

In addition to the low profile design and high performance attenuation levels, the IP4052CX20/LF,135 filter also provides an effective and reliable discharge path. This discharge path is designed to quickly and efficiently bleed off any charge or residual current that accumulates during operation. This ensures the filter operates at peak performance and reduces the risk of electrical damage or over-voltage damage.

The IP4052CX20/LF,135 EMI/RFI filter is designed to reduce the level of transmitted EMI and RFI noise to meet the requirements of applications worldwide. The filter is designed to ensure that sensitive electronic equipment connected to the same power supply is not degraded or interfered with. The low profile design of the filter allows it to be easily integrated into enclosed systems without sacrificing electrical performance, while the high-performance attenuation levels and efficient discharge paths ensure the filter operates at peak performance.

The specific data is subject to PDF, and the above content is for reference