IPSSAT-G1000-5S

Pressure sensors, transducers, and the IPSSAT-G1000-5S are devices that measure physical pressure and convert the physical measurement into an electrical signal. Pressure sensors work to measure the pressure exerted by liquids, gases, or solids. The IPSSAT-G1000-5S is a special type of pressure sensor, which is specifically designed for use in hazardous environments. It is commonly used in industrial applications such as oil and gas production, chemical processing, and refining.

IPSSAT-G1000-5S Application Field

The IPSSAT-G1000-5S is a rugged, robust pressure sensor, ideal for harsh, hazardous, and extreme environment applications. It is designed for use in a variety of industries, from oil and gas production to chemical processing. The sensor is able to measure a range of pressures from -40 Psig to 5500 Psig. It is able to operate in temperatures between -40°F to 250°F (-40°C to 120°C). It is also able to withstand high salt spray and corrosion, and can operate in high vibration environments. The unit is also designed to be resistant to shock and vibration and is rated IP67 ingress protection.

IPSSAT-G1000-5S Working Principle

The IPSSAT-G1000-5S is a piezoresistive pressure sensor, which uses a diaphragm, resistive bridge, and amplifier circuit to measure pressure. The diaphragm is a ceramic-based structure that responds to pressure changes with a proportional change in resistance. The diaphragm is attached to a resistive bridge, which consists of four equal resistors. As pressure is applied to the diaphragm, it applies an opposing force on the resistive bridge, which changes the resistance of the four resistors. This change in resistance is then amplified and converted into an electrical signal, which can be monitored and controlled. The sensor output can be sent to an analog or digital device for further processing.

The IPSSAT-G1000-5S is designed to be a reliable and accurate pressure sensor for hazardous environments. It is designed to withstand a wide range of temperatures and pressures, which makes it ideal for industrial applications where extremes may be encountered. Additionally, the unit has a small form factor and can be easily installed and maintained. This makes the unit a popular choice for industrial applications.