IQ1212S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are devices that provide power to an electrical load from an input voltage. The IQ1212S is a high-efficiency, low-noise switching regulator with an output voltage of 12V. It is widely used in applications where a steady 12V DC power supply is necessary, from providing power to small or medium-sized electrical components to in-vehicle applications.

The IQ1212S is a step-down DC converter that operates by converting a higher input voltage to a lower, regulated output voltage. It works by using a switching transistor to alternately connect the input voltage to a high voltage (HV) capacitor or to a low voltage (LV) capacitor. When the transistor is in the LV position, the LV capacitor is charged up to a voltage higher than the output voltage, while when the transistor is in the HV position, the HV capacitor is discharged to the output voltage.

In addition, the IQ1212S uses an additional transistor to regulate the output voltage. This transistor acts as a switch, connecting the HV and LV capacitors in series when the output voltage is below the setpoint, and in parallel when the output voltage is above the setpoint. This improves regulation accuracy and efficiency compared to similar devices.

The IQ1212S is designed for use in a variety of applications including power supplies and chargers for high-precision consumer and industrial electronics, communications equipment, and automotive electronics. It features high efficiency, low noise, and incredible stability, as well as automated current-limiting protection, reverse-polarity protection, and EMI-suppression.

The IQ1212S can be operated in either continuous current or pulse-width modulation (PWM) modes. When operated in continuous current mode, the output voltage is regulated by adjusting the duty cycle of the PWM signal. This allows for precise control of the output voltage and eliminates the need for additional circuit components for voltage sensing or regulation. In PWM mode, the output voltage is determined by the frequency of the PWM signal and the duty cycle. This method allows for fast response and minimum ripple.

The IQ1212S is also designed to reduce EMI, which is a major concern in modern electronics. This is achieved by using a soft-switching technique to turn on and off the output transistors. This reduces the amount of ring distortion in the current waveform, resulting in lower levels of radiated EMI noise.

In summary, the IQ1212S is an efficient, low-noise switching regulator with many features which make it ideal for a wide range of applications. It offers excellent regulation accuracy, high efficiency, low noise, and EMI-reduction. With its wide input voltage range and automated protection features, the IQ1212S is an ideal solution for powering high-precision devices.

The specific data is subject to PDF, and the above content is for reference