IRKD71/06A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IRKD71/06A belongs to a group of diode arrays, also known as rectifiers, which are designed typically in a semiconductor package to be used in different applications. Rectifiers are responsible for controlling electrical current flow, by allowing an electrical current to flow in one direction while blocking it in the opposite direction. In the case of the IRKD71/06A, the rectifier is specifically used for power electronic applications, where a high voltage is required for the electric current to flow.

The IRKD71/06A has a dual diodes in one package, and it features a repetitive peak reverse voltage of 700V. This rectifier also has a peak forward surge current of 45amps, and can stand a maximum junction temperature of up to 175°C. It is suitable for surface mounting on printed circuit board, and is able to operate in temperatures of between -65°C and 175°C. The rectifier is also tested and proven to provide high reliability against thermal, overload and short circuit conditions.

The working principle of the IRKD71/06A rectifier is quite simple and basic. A typical rectifier consists of two terminals, a cathode and anode. The anode is the positive terminal and the cathode is the negative terminal. When a voltage is applied between the two terminals, the current will flow from the anode to the cathode or from the positive side to the negative side. However, if the applied voltage is reversed, the current holds back and does not flow in the opposite direction, thus blocking the current.

The IRKD71/06A rectifier is typically used in switching power supplies and motor drives. The high peak. this rectifier can handle can make it a superior choice in applications such as solar systems and wind turbines, due to its durability and reliability. Additionally, its low capacitance makes it a great choice for UPS systems, high frequency inverters, Uninterruptible Power Supply (UPS) systems and voltage doubling converters.

In conclusion, the IRKD71/06A rectifier is a diode array which is designed to be used in power electronic applications, particularly those where higher voltage is required. It features a dual diode in one package, and it has a repetitive peak reverse voltage of 700V, and a peak forward surge current of 45amps. The working principle of the rectifier is simple, only allowing the current to flow from the anode to the cathode or from the positive side to the negative side. The rectifier is typically used in switching power supplies and motor drives, as well as applications such as solar systems and wind turbines. Additionally, its low capacitance makes it perfectly suitable for use in UPS systems, high frequency inverters and voltage doubling converters.

The specific data is subject to PDF, and the above content is for reference