IRKL56/10A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IRKL56/10A is a thyristor module, which belongs to the family of SCRs (Silicon Controlled Rectifiers) and has been designed to control electrical power and offer protection in various applications. It is used in high power and large current applications like high power converter, motor starter and lamp ballast.

The IRKL56/10A works primarily as an AC switch. This module has three terminals, the anode (or main electrode), the cathode (the control electrode) and the gate (the control electrode). When a positive voltage is applied to the gate terminal, the thyristor will break into conduction and let considerable amount of current pass through the device. When the voltage applied to the gate terminal is removed, the thyristor remains in conduction until its current drops below a specific level or to zero.

This thyristor module can be used in a variety of applications. It can be used as a diverter between rectifiers and AC networks or to adjust the speed of a motor or to respond to a signal applied to the gate. It is also used in AC drives and power supplies and performs very well in applications such as chopping circuits for LED lamp ballasts, starting and stopping of motors, firing of DC/AC converters, heating control, as well as other high power and large current applications.

The IRKL56/10A can also be used as a rectifier bridge in scenarios where power needs to be extracted from an AC power source. At a given frequency, and depending on the circuit configuration, it can be configured as either a full wave rectifier or a half wave rectifier. The full wave rectifier produces an output current that is the same polarity no matter the input polarity, while the half wave rectifier produces an output current with reversed polarity compared with the input.

The IRKL56/10A is also used as a snubber when switching medium and high voltages. This involves the placement of a non-linear device, like a thyristor, in parallel to the high voltage switching device, such as a high voltage contactor. The non-linear device acts as a damping element which helps to reduce the switch arc and the contactor bouncing, thus minimizing the stress on the contacts and saving energy. 

Another application involves the filing of a capacitor bank when it is used as an AC filter. Here, the IRKL56/10A can be used as a timer-controlled switch to prevent the capacitor from overcharging. The module will fire a certain amount of time after the line voltage is above the start threshold. Then, the output voltage will begin to decrease until it falls below the cut-off line, at which point the module will open the circuit and prevent the capacitor from overcharging.

The IRKL56/10A thyristor module is a reliable, efficient and cost effective solution for a wide array of applications, from chopping circuits to power supplies and motor control. It is easy to integrate with existing systems, thanks to its simple and versatile design.

The specific data is subject to PDF, and the above content is for reference