IRKT136/16

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors – SCRs – Modules

IRKT 136/16 is a type of controlled rectifier belonging to the family of thyristors, silicon-controlled rectifiers (SCRs). It is considered a static switch because it requires the human operator to initiate and control the conduction via a triggering signal. When the required triggering signal is activated, the SCR device passes electric current with no further control, until the current flowing through it drops to zero.

The IRKT 136/16, a single-phase half-wave SCR, provides six hierarchical levels of protection. These are divided into two broad categories, such as over-current protection and over-voltage protection.

The different components that make up the elementary rectifier are the gate, the anode and the cathode, as well as the anodic junction and the cathodic junction. The gate serves as the electronic control for the device, through which a signal must be sent for activation.

The anode is the end point of the supply current that is being controlled. The cathode is connected to the neutral busbar, that serves as the reference point of the controlled electrical system. The anodic junction and the cathodic junction serve as the connection points between the gate signal and the device. The junction between the anode and the gate signal is the anode gate junction, while the junction between the cathode and the gate signal is the cathode gate junction.

One of the primary functions of the IRKT 136/16 is to provide surge protection. The SCR device responds to an excess amount of current and breaks the current path. This prevents damage to the device itself, as well as to any other connected devices. Additionally, the IRKT 136/16 can be used in applications where heavy loads needs to be switched on and off quickly. In such cases, the SCR device allow for rapid transition between high and low states.

The IRKT 136/16 is also used in applications that require the switching of the current in order to transfer it from one circuit to another, such as in solar panel systems and battery management systems. In such cases, the SCR device must be provided with a consistent and precise triggering signal to ensure efficiency and reliability.

The IRKT 136/16 is suitable for use with all types of AC/DC power supplies, including AC/DC power supplies that use a wide range of input voltages. The device can support up to 65A of current and is suitable for applications such as motor control, power factor correction, transformers, and lighting control. Additionally, due to its lightweight design, the IRKT 136/16 can be easily installed in tight spaces.

Overall, the IRKT 136/16 is a versatile SCR device that can be used in various applications. It is suitable for use with AC and DC power supplies, provides surge protection, and can be used for switching large loads. Due to its lightweight design, it can be easily installed in confined spaces, making it ideal for a variety of different applications.

The specific data is subject to PDF, and the above content is for reference