ISL28110FBZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ISL28110FBZ is a linear-amplification instrumentation for operation amplifiers, buffers and amplifiers. It provides an amplification gain of up to 200 with a wide signal-to-noise ratio (SNR) of 118 dB. The amplifier offers low power consumption, high linearity and excellent frequency response, ensuring high performance and reliability.

ISL28110FBZ works based on a total of 5 pins, which separate the input and output lines, allowing for easy connection and setup. The pins of this amplifier are typically found in an 8-lead PDIP (Plastic Dual-Inline Package) package. On the input side of the amplifier, the two pins control the power supply, while the other three pins allow for control of the input signal. On the output side, two pins control the power supply, while the remaining pin is used to select the output level.

The main purpose of using the ISL28110FBZ is to provide additional amplification to single-ended voltage signals. When an input signal is applied on the input pins, the amplifier will detect the signal and provide an amplification gain, depending on the circuit configuration. Furthermore, the amplifier’s working principle also relies on the selection of the correct voltage level for the output signal. This is done by adjusting the level via the control pins.

In addition to this, the ISL28110FBZ can be used to provide high frequency amplification and low noise. The amplifier’s high SNR ensures that the incoming signal can be amplified accurately and with minimal distortion. Furthermore, the amplifier’s high linearity helps prevent feedback loops and oscillations that can reduce signal quality.

Finally, the ISL28110FBZ provides excellent frequency response, allowing for efficient use of the amplifier under a wide range of usage scenarios. The frequency response of this amplifier is also adjustable via the control pins, allowing for custom configuration of the amplifier. This ensures that the amplifier can provide amplification of signals that are within its operating parameters.

The specific data is subject to PDF, and the above content is for reference