ISL3175EIBZ-T Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ISL3175EIBZ-T is a current-mode bidirectional, unidirectional regulator from Intersil Corporation. It belongs to the family of Interface - Drivers, Receivers, Transceivers and is widely found in device designs such as ATMs, point-of-sale (POS) terminals, medical instruments, industrial controls, handheld and other embedded products.

This device provides a complete bi-directional, uni-directional current-mode control scheme that combines an enhanced over-voltage protection circuit with a low-side current-mode driver capable of delivering up to 1A peak current into the load.  It takes in a set of regulated voltages and provides power to the load without disturbing the regulated voltage output on the input.

ISL3175EIBZ-T is composed of three parts: the high-side MOSFET, a low-side MOSFET and a current-sensing transistor. It can be used for a wide range of applications including bi-directional, uni-directional and high-current switching applications. The device can also be used to control energy transfer to/from a load in a variety of circuit topologies such as boost, buck, inverting and flyback.

ISL3175EIBZ-T has a wide operating range of 4.5V to 35V across its input and output, making it the ideal device for a variety of low- to high-voltage applications. It is designed to withstand voltages up to 41V, which makes it suitable for industrial applications. The device is protected against over-current, over-voltage, under-voltage and short-circuit conditions for added safety.

The working principle of ISL3175EIBZ-T involves the combination of high-side and low-side switches. When there is a voltage differential across the switches, current will flow from the higher voltage potential towards the lower voltage potential. The low-side switch allows for current flow to the output when its gate voltage is greater than its source voltage. Conversely, when the gate voltage is lower than the source voltage, the current flow from the output is blocked. The high-side switch functions in the same way, but it is the source voltage that is compared to the gate voltage.

The current-sensing transistor is used to measure the peak current on the high-side switch. This allows for accurate current sensing, even when switching changes occur rapidly. The control logic then uses the voltage sense signal to control the low- and high-side switches and to limit the output current. This allows for tight control and repeatability of the output current, leading to high efficiency, even under transient conditions.

In summary, ISL3175EIBZ-T is a current-mode bidirectional, unidirectional regulator from Intersil Corporation. It is capable of providing a complete bi-directional, uni-directional current-mode control scheme for a wide range of applications, including low- and high-voltage solutions. The device also provides a high-level of protection against over-current, over-voltage, under-voltage and short-circuit conditions. Its working principle is based on a combination of high-side and low-side switches and a current-sensing transistor, and it can be used in a variety of circuit topologies.

The specific data is subject to PDF, and the above content is for reference