ISL43144IR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ISL43144IR is an amplifier/switch IC. It is a component of the ISL43140/ISL43144 family of ultra-low power, single supply amplifiers and switches, built using Intersil’s advanced CMOS process. This component is highly stable and consumes low power. The device is designed for low voltage and low power electronics applications and supports operation from a single supply voltage as low as 2.5V. The component offers three low power modes including shutdown, standby, and powered ON mode with an overall current consumption of just 25μA.

The ISL43144IR can be used in various applications such as analog switches, multiplexers, demultiplexers, sample-and-hold amplifiers, and temperature measuring systems. It can also be used in low voltage analog-to-digital converters, AC/DC signal switching, cycling the power supply, radio frequency switching and isolation amplifiers. The device offers excellent isolation protection for the data bus and is suitable for a wide range of EMI filtering and EMI immunity designs.

Application Field of ISL43144IR

The application field of ISL43144IR is mainly in the field of analog switches, multiplexers, and demultiplexers. It is used to switch an analog signal from one location to another. The ISL43144IR can also be used as a sample and hold amplifier. It can be used to sample an analog signal and hold it until the next sampling cycle. This ensures that the signal is held in its original form and allows it to be accurately measured. It can also be used in temperature measuring systems as it offers excellent isolation protection for the data bus.

The ISL43144IR can also be used in low voltage analog-to-digital converters, AC/DC signal switching, cycling the power supply and radio frequency switching. It can also be used in a wide range of EMI filtering and EMI immunity designs. The device is highly stable and consumes low power, making it a suitable choice for all power efficiency applications.

Working Principle of ISL43144IR

The ISL43144IR offers three low power modes: shutdown, standby, and powered ON mode. The Shutdown Mode reduces the input bias current to a very low value and all the amplifier functions are OFF allowing very low leakage. In the standby mode, signals are processed by the integrated circuits, but the output is not operated. The last mode is the active mode, which requires a supply voltage of 1.8V to 5.5V and a total current consumption of only 25uA. The device features low propagation delay, wide operating band and wide bandwidth.

The device features a low voltage differential input voltage of 5 mV min and a high slew rate of 2 V/μs when operating from 4.5V. The differential input impedance is less than 8.5kΩ and the common mode input impedence is less than 35kΩ. The supply current for amplification is 10μA/div and the minimum power supply of the device is 2.5 V. The device\'s input capacitance is less than 10 pF, which allows it to drive low impedance loads.

The device features a wide range of features that make it suitable for a variety of applications. The output stage features a rail-to-rail output stage that allows the device to switch between high and low output voltage easily. The open drain NFET output has the benefit of low EMI because the switch is turned off by pulling the output to ground. Finally, the low quiescent current makes the device suitable for battery and solar cell applications.

The specific data is subject to PDF, and the above content is for reference