IX2B11P7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IX2B11P7 is a gate driver module from IXYS Corporation that is capable of driving a variety of gate loads with up to 7 peaks of gate-source voltage (Vgs). It is designed for use in a variety of applications, such as isolated SMPS, isolated AC/DC switchmode converters, and steady-state low-power DC/DC converters. It is also suitable for use in pulsed DC/DC converters, including hard switching applications. This gate driver module is capable of driving voltages up to 1000V, making it an ideal choice for powering high-voltage applications.

The IX2B11P7 is a monolithic integrated circuit integrated in a single package and is based on IXYS Corporation’s patented CrossoverCMOS technology. It consists of two independent low-side and high-side MOSFET drivers, each capable of driving up to 3A of gate charge. The module also features built-in temperature protection and under-voltage protection functions to protect the device and its circuitry from potential hazards. In addition, the module also features overvoltage protection and short-circuit protection in order to prevent damages to the integrated circuit and other connected circuitry.

The IX2B11P7 is an ideal device for applications that require both high-performance driving capabilities and high-voltage protection. With its high maximum input of 1000V, the module can be used in applications where large voltages need to be driven, such as in high-voltage power supplies and transformers. It is also suitable for use in high-power applications, such as in motor drives, because it can handle up to 3A of gate charge. Additionally, the module\'s built-in temperature and under-voltage protection functions ensure that no permanent damage can occur to the integrated circuit or other connected components.

The IX2B11P7 also features a slew-rate improvement circuit, which ensures that the device can switch between different outputs at a fast rate. This is particularly important for applications that require fast switching, such as motor drives, as any time that is wasted while the device is switching can result in decreased efficiency. The gate driver module also includes an adjustable blanking delay, allowing the user to control how long the device stays in a certain output, ensuring that the device is not switching between outputs too often and using too much power in the process.

In order to ensure proper working of the IX2B11P7, it is important to connect the correct load synchronisation and ground pins. The load synchronisation pins must be connected to the gate of the load, while the ground pin must be connected to a grounded source to ensure the functioning of the module’s overvoltage and short-circuit protection features. When properly connected and powered, the module will operate efficiently, driving the load at speeds of up to 100kHz. This makes the module suitable for use in a variety of applications, such as in motor drives, where a fast switching time is required in order to achieve a desired torque.

In summary, the IX2B11P7 is a gate driver module from IXYS Corporation that is capable of driving a variety of gate loads with up to 7 peaks of gate-source voltage (Vgs). It is suitable for use in a variety of applications, including isolated SMPS, isolated AC/DC switchmode converters, and steady-state low-power DC/DC converters. In addition, the IX2B11P7 also features a slew-rate improvement circuit, temperature protection, and under-voltage protection functions, as well as overvoltage and short-circuit protection features. Its ability to support up to 1000V and drive a gate charge up to 3A makes it an ideal choice for powering high-voltage and high-power applications.

The specific data is subject to PDF, and the above content is for reference