JANTX2N2605

Series:	Military, MIL-PRF-19500/354
Packaging:	Bulk
Part Status:	Active
Transistor Type:	PNP
Current - Collector (Ic) (Max):	30mA
Voltage - Collector Emitter Breakdown (Max):	60V
Vce Saturation (Max) @ Ib, Ic:	300mV @ 500µA, 10mA
Current - Collector Cutoff (Max):	10nA
DC Current Gain (hFE) (Min) @ Ic, Vce:	100 @ 10mA, 5V
Power - Max:	400mW
Frequency - Transition:	--
Operating Temperature:	-65°C ~ 200°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-206AB, TO-46-3 Metal Can
Supplier Device Package:	TO-46 (TO-206AB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The JANTX2N2605 is a high-speed, high-switching rate, N-Channel Enhancement Mode Field Effect Transistor (FET) that has been designed and optimized for operation in high-frequency analog applications. It is a depletion-mode pass device that is used to amplify signals in their high-frequency range and is commonly used to switch rapidly between the two supply rails. It has been tested and proven to provide excellent switching performance, due to its high operating frequency and fast turn-off time. The JANTX2N2605 is an advanced FET that features low on-resistance, low gate charge, low gate resistance, and low input capacitance. This device is used in a wide range of applications, including radio-frequency (RF) amplifiers, power MOSFETs, and low-frequency analog switching applications.

Applications of JANTX2N2605

The JANTX2N2605 is a versatile device that can be used in a variety of applications. It is primarily used in RF amplifiers and other high-frequency analog switching applications. It can be used as an amplifier, as a limiter, or as a switch in a signal path. Other application areas include operational amplifiers, digital-to-analog converters, power supply switching, and security systems. Radio frequency amplifiers are used to amplify short-wave communications and are used in both home and commercial settings. The JANTX2N2605 is also used in audio amplifiers, cellular phones, and other communication devices. In addition to applications in communications, the JANTX2N2605 can also be used as a low-frequency analog switch. This device can be used in a wide variety of switching applications, from small-scale analog switches to large-scale charge pumps and other power applications. The JANTX2N2605 is also used in power management, such as for voltage regulation, power distribution and load switching. The JANTX2N2605 is also used in LED lighting systems and automotive applications.

Working Principle of JANTX2N2605

The JANTX2N2605 works on the principle of voltage control. The device is normally in an off state until a gate voltage is applied to it. The gate voltage will turn the device on, allowing current to flow from the drain to the source terminal. The current flow can then be controlled by varying the gate voltage applied to the device. In order to turn the device off, the gate voltage needs to be reduced. The device will then enter a depletion mode and no further current will be able to flow from the drain to the source. This makes the JANTX2N2605 suitable for applications such as switching and limiting, where exact and precise control of the current is required.The JANTX2N2605 also features low input capacitance and low gate charge. The input capacitance is the amount of energy stored in the gate-to-source capacitance of the device, while the gate charge is the amount of energy needed to change the gate voltage and switch the device\'s state. Both of these values determine the switching speed of the device and will affect the overall performance.

Conclusion

The JANTX2N2605 is a versatile, high-performance FET device that can be used in a variety of applications. It is suitable for use in high-frequency analog switching applications and in RF amplification, as well as for low-frequency applications such as power supply switching and voltage regulation. The device works on the principle of voltage control, making it suitable for use in applications where exact and precise control of the current is required. Its low input capacitance and gate charge values also make it a suitable choice for applications where high-speed switching is necessary.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description