JTN1AG-TMP-F-DC6V

Power relays are electrical circuits that control the flow of current in another circuit using a low power input signal. Power relays are used in a wide range of applications to control higher voltage and current levels than that available in the control circuit. The JTN1AG-TMP-F-DC6V is a single pole, double throw (SPDT) power relay with an AgNi contact material, an operating voltage of DC6V, and a current rating of more than 2 amperes. The uses and working principle of the JTN1AG-TMP-F-DC6V are detailed below.

Applications

The JTN1AG-TMP-F-DC6V power relay can be used in many applications where a low power signal can control a higher voltage and/or current. These applications can include, but are not limited to, motor control, lighting control, and HVAC control. This power relay is ideal for applications that need to switch current or voltage from one circuit to another, such as in automatic machine shutdowns. It can also be used in safety circuits, such as those used to cut power to a machine when an overload or other safety hazard is detected.

Working Principle

The JTN1AG-TMP-F-DC6V is an electrically operated relay. It has a switched contact, which is either normally open (NO) or normally closed (NC). When electricity is sent to the input side, the relay is activated and the contact is switched according to its settings. The mechanism by which this occurs is based on the fact that an electromagnet, when energized, generates a magnetic field which attracts a metal armature and closes the relay’s contacts. The contacts remain closed as long as the input power is supplied.

The JTN1AG-TMP-F-DC6V has a switching capacity of more than 2 amperes and a coil resistance of 25Ω at an operating voltage of DC6V. This is a relatively high operating voltage and hence, the relay provides a greater margin of safety and longer life than other relays. It also has a maximum switching power of 75W and a maximum switching voltage of 250V.

Conclusion

The JTN1AG-TMP-F-DC6V is a single pole, double throw power relay with an AgNi contact material, an operating voltage of DC6V, and a current rating of more than 2 amperes. It is ideal for applications where a low power signal can control higher voltage and/or current, such as motor control, lighting control, and HVAC control. The power relay works by energizing an electromagnet which generates a magnetic field that attracts a metal armature and closes the relay’s contacts. The JTN1AG-TMP-F-DC6V has a switching capacity of more than 2 amperes, a coil resistance of 25Ω at an operating voltage of DC6V, a maximum switching power of 75W, and a maximum switching voltage of 250V.