JTN1S-PA-F-DC24V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power relays, particularly those handling currents of over 2amps, are an essential element within the design of various automated systems. Designs that feature mechanical, electrical or electronic subsystems must often contain elements that enable them to work together, and power relays are often the connecting component that provides this requirement. The JTN1S-PA-F-DC24V is an example of a power relay specifically designed for applications in which high power levels are required.

The JTN1S-PA-F-DC24V is a direct current power relay designed with an operating voltage of 24 volts, so it should only be used in applications where low voltage direct current sources are available. It has a current capacity of 2.5 amps, which is typical for over 2 amp relays, and also features two normally open contacts, meaning that the relay on its own allows current to flow through it when it is in the deactivated state.

Its application field can be flexible for use in a range of automated applications, ranging from home automation and industrial control equipment, but it should only be used with direct current voltage sources as the coil is designed specifically for DC power input. This flexibility makes the JTN1S-PA-F-DC24V well suited for many automated systems, and it is also well adapted for use in any hardware which requires powerful handling of relatively low voltage levels of direct current.

Working with direct current, the JTN1S-PA-F-DC24V follows the logic of a "normally open" power relay. This means that when the coil is not activated, the relay is open for current to pass through as normal, whereas when the coil is energised (or activated) the relay will close which will then prevent the passage of current. In this way the relay can be used to actuate and de-actuate electronic, electrical or mechanical components which require control.

In terms of its construction, the JTN1S-PA-F-DC24V is made up of a relay hardware, mounted to a PCB. The relay has two internal terminals marked R1 and R2 which correspond to the normally open contacts of the relay. The terminals are designed to accept standard wiring such as 0.5mm sq AWG18 or equivalent. The PCB is designed with open frame mounting holes, and a built in diode circuit which protects the relay from voltage spikes generated when the coil is de-energised.

The JTN1S-PA-F-DC24V is also designed for long operational life. Relays typically work through repeated cycles in which they turn on and off in response to control signals. The JTN1S-PA-F-DC24V features an exceptionally low power loss, which translates into a much longer operational life of around one million cycles. This is particularly useful in applications where the relay is expected to remain on for prolonged periods of time.

The JTN1S-PA-F-DC24V is an excellent example of a heavy duty power relay designed specifically for applications that require high power handling of direct current. Its current capacity of 2.5 amps, coupled with its low power loss and long operational life make it an ideal solution for various automated system activities. The JTN1S-PA-F-DC24V has a wide application field, but is most suited to the needs of those who need to be sure that their systems can reliably deal with powerful handling of relatively low voltage direct current.

The specific data is subject to PDF, and the above content is for reference