K1100GURP Discrete Semiconductor Products |
|
Allicdata Part #: | F6678TR-ND |
Manufacturer Part#: |
K1100GURP |
Price: | $ 0.23 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Littelfuse Inc. |
Short Description: | SIDAC 104-118V 1A UNI DO-15 |
More Detail: | Diac/Sidac Thyristor 104 ~ 118V 1A DO-204AC (DO-15... |
DataSheet: | K1100GURP Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.21450 |
10000 +: | $ 0.20644 |
25000 +: | $ 0.19999 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Voltage - Breakover: | 104 ~ 118V |
Current - Breakover: | 10µA |
Current - Hold (Ih) (Max): | 80mA |
Current - Peak Output: | 1A |
Operating Temperature: | -40°C ~ 125°C (TJ) |
Package / Case: | DO-204AC, DO-15, Axial |
Supplier Device Package: | DO-204AC (DO-15) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thyristors - DIACs, SIDACs
A thyristor is an electronic component used to switch electrical currents or control the flow of power in an electrical system. It takes the form of a solid-state device that has two or more electrodes. One form of a thyristor is the K1100GURP thyristor, which has three electrodes and is suitable for switching and rectifying electrical currents. This article will give an overview of the K1100GURP application fields and working principle.
Application Fields
K1100GURP thyristors are used in a variety of applications, including motor control, voltage regulation, and switch-based power systems. The K1100GURP is also used in free-wheeling diode circuits to protect against reverse current flow, provide glitch-free operation during power supply switching, and reduce circulating load current in switch mode power supplies. The thyristor can also be used in power factor correction circuits to reduce harmonic distortion in AC power loads.
Due to their high surge handling capabilities, K1100GURP thyristors are often used in over-voltage protection and emergency power supply systems. They can also be used in solar energy systems and in adjustable speed motors. In addition, the K1100GURP is suitable for use in applications that require bidirectional device current flow, such as uni-directional float switches.
Working Principle
The K1100GURP thyristor works by allowing a voltage to be applied to its anode, which in turn causes an electric current to flow through the device. The amount of current that can flow through the device is limited by the gate voltage, which is applied to the gate terminal. The gate voltage must reach a certain threshold level before the current can flow through the device. Once the current starts to flow, the device will remain in the \'on\' state until the current is reduced to zero, or the gate voltage is removed.
The K1100GURP thyristor is a three-terminal device with two anodes and a gate. The two anodes are connected together and the gate is connected to the voltage source. When the gate voltage reaches the threshold value, the thyristor is triggered and current flows through the device. The current can be stopped by reducing the gate voltage or by removing the voltage source from the circuit.
The K1100GURP can also be used as a rectifier, allowing current to flow into the device from one anode and out of the device from the other anode. This is useful in applications such as DC to AC converters, where the thyristor can be used to rectify the incoming AC signal and produce a DC waveform.
Conclusion
The K1100GURP thyristor is a versatile device that can be used in a variety of electrical systems. It is suitable for motor control, voltage regulation, switch-based power systems, and solar energy applications. It is also useful in rectification and over-voltage protection circuits. The thyristor works by allowing a gate voltage to reach a certain threshold level, which then triggers an electric current through the device.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
HMU-PAT-FH-K110 | Hirose Elect... | 0.0 $ | 1000 | CONN MU ATTENUATOR IN-LIN... |
K110007 | Arduino | 60.91 $ | 21 | STARTER KIT CHINA |
K110660001 | Luxo | 120.79 $ | 1000 | LAMP ARTICULATING FLUOR 2... |
K110660002 | Luxo | 131.55 $ | 1000 | LAMP ARTICULATING FLUOR 2... |
K110620001 | Luxo | 167.76 $ | 1000 | LAMP ARTICULATING FLUOR 1... |
K110670001 | Luxo | 167.76 $ | 1000 | LAMP ARTICULATING FLUOR 2... |
K110670002 | Luxo | 167.76 $ | 1000 | LAMP ARTICULATING FLUOR 2... |
K110620003 | Luxo | 174.99 $ | 1 | LAMP ARTICULATING 120V 60... |
K110620002 | Luxo | 174.99 $ | 1000 | LAMP ARTICULATING 120V 60... |
K110630001 | Luxo | 221.45 $ | 1000 | LAMP ARTICULATING FLUOR 1... |
K110630002 | Luxo | 221.45 $ | 1000 | LAMP ARTICULATING FLUOR 1... |
K1101 | -- | 1000 | TIP THERMOCOUPLE WELD RT4 | |
K1100E70AP | Littelfuse I... | -- | 1000 | SIDAC 104-118V 1A TO92Dia... |
K1100E70RP2 | Littelfuse I... | 0.28 $ | 1000 | SIDAC 104-118V 1A TO92Dia... |
K1100E70 | Littelfuse I... | 0.67 $ | 2000 | SIDAC 104-118V 1A TO92Dia... |
K1100SRP | Littelfuse I... | 0.25 $ | 1000 | SIDAC 104-118V 1A DO214Di... |
K1100S1URP | Littelfuse I... | 0.22 $ | 1000 | SIDAC 104-118V 1A UNI DO-... |
K1100G | Littelfuse I... | 0.69 $ | 999 | SIDAC 104-118V 1A DO15Dia... |
K1100GURP | Littelfuse I... | 0.23 $ | 1000 | SIDAC 104-118V 1A UNI DO-... |
K1100GRP | Littelfuse I... | 0.27 $ | 1000 | SIDAC 104-118V 1A DO15Dia... |
K1100S | Littelfuse I... | 0.0 $ | 1000 | SIDAC 104-118V 1A DO214Di... |
DIAC DO-41Diac/Sidac Thyristor DO-41
DIAC DO-41Diac/Sidac Thyristor DO-41
SIDAC 7-9V 1A TO92-3Diac/Sidac Thyristor...
SIDAC 150-170V 900MA AXIALDiac/Sidac Thy...
SIDAC 220-250V 1A AXIALDiac/Sidac Thyris...
SIDAC 220-250V 1A AXIALDiac/Sidac Thyris...