K2500F23

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are semiconductor devices which are widely used in power control circuits. They are most commonly seen in rectifier circuit designs, where they are used to convert AC current to DC current. However, thyristors can also be used in a wide range of other applications. DIACs, SIDACs, and K2500F23 are a sub-category of Thyristors which are used for specific purposes. In this article, we will discuss the application field and working principle of K2500F23.

K2500F23 is a type of bidirectional thyristor switch, also known as a “DIAC-SCR” or “Dual SCRs”. It is a combined component which contains two high-current SCRs, connected to each other in reverse parallel in order to provide bidirectional switching of AC or DC power. This component can switch relatively large power flows, as it can withstand peak currents of up to 35kA and has a peak voltage rating of up to 1.2 kV.

K2500F23 is mainly used in high power AC Lighting systems, such as spotlights, street lights or floodlights. Due to its large peak current and voltage ratings, K2500F23 is an ideal component for controlling large amounts of power. The component can also be used in medium or large power inverters and solar panel systems. It is also suitable for use in motor drives, where it can be used to control motor speeds.

K2500F23 works in a similar way to other Thyristors. It has two electrodes, known as the anode and the cathode. The anode is always connected to the positive voltage supply and the cathode is connected to a control circuit. When the control circuit applies a short pulse of current, the Thyristor is turned on and it allows current to flow from the anode to the cathode. When the control circuit is disabled, the Thyristor is turned off and the current flow stops.

K2500F23 can be used as either a switch or a regulator. When used as a switch, the control circuit pulses on and off depending on the desired status of the load. When used as a regulator, the control circuit pulses at different frequencies in order to regulate the load\'s current or voltage. A regulator is often used in motor drives, as it can maintain a constant speed of the motor.

In addition to its switching and regulating capabilities, K2500F23 can also provide protection against surges or other undesired electrical events. This is achieved by sensing the input voltage and providing a cut-off signal when it exceeds the device\'s threshold limits. This will shut down the circuit and thus avoiding any damage caused by spikes in current or voltage.

K2500F23 is a highly versatile and reliable component, which is widely used for a variety of applications. Its high current and voltage ratings make it ideal for controlling high power flows, particularly in AC Lighting systems, inverters and solar panel systems. Furthermore, its ability to provide surge protection makes it useful for protecting circuits from damage. These attributes make K2500F23 an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference