Allicdata Part #: | KA311DTF-ND |
Manufacturer Part#: |
KA311DTF |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ON Semiconductor |
Short Description: | IC COMPARATOR SINGLE 8-SOP |
More Detail: | Comparator General Purpose Open-Collector, Open-Em... |
DataSheet: | KA311DTF Datasheet/PDF |
Quantity: | 1000 |
Current - Output (Typ): | -- |
Base Part Number: | KA311 |
Supplier Device Package: | 8-SOP |
Mounting Type: | Surface Mount |
Package / Case: | 8-SOIC (0.154", 3.90mm Width) |
Operating Temperature: | 0°C ~ 70°C |
Hysteresis: | -- |
Propagation Delay (Max): | -- |
CMRR, PSRR (Typ): | -- |
Current - Quiescent (Max): | 7.5mA |
Series: | -- |
Current - Input Bias (Max): | 0.25µA @ ±15V |
Voltage - Input Offset (Max): | 7.5mV @ ±15V |
Voltage - Supply, Single/Dual (±): | 5 V ~ 30 V, ±2.5 V ~ 15 V |
Output Type: | Open-Collector, Open-Emitter |
Number of Elements: | 1 |
Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Linear comparators are a type of highly accurate device that is used to compare two signal or voltage levels and produce an output signal corresponding to the difference between them. This signal can be used to form a logic level or as an error signal in a control system. They are particularly useful in applications such as level control, signal regulation, signal switching, signal measuring, and in the calibration of measuring equipment. One such comparator, the KA311DTF, is the subject of this article.
The KA311DTF is a single, low-power, low-voltage linear comparator that can be used in a variety of design solutions. It is a versatile device that is suitable for applications involving high-speed logic, precision processing, and high-accuracy data communications. It is also capable of accepting a wide range of input voltages and providing a variety of output states. The KA311DTF is a good choice for applications where power consumption and cost savings are important considerations.
The KA311DTF employs a differential amplifier topology, wherein two signals, a reference and a random input, are compared directly and the output is based on the difference between their values. The output will be low whenever the random input is less than the reference, and high if the random input is greater. The comparator can also be configured to toggle between high and low based on which signal is sent to it. This makes it ideal for applications where switching or triggering needs to occur at specific times or values.
The KA311DTF is capable of accepting input ranging from -0.3V to +4.9V, with a supply voltage of only 3V. It has a low power consumption (40uA) and low noise levels, making it suitable for a wide range of applications. Its output can be configured as an open drain or open collector, allowing it to be used with both totem pole and CMOS logic. It also features an in-rush current protection circuit, which protects the device from damage that could be caused by sudden changes in input voltage.
The KA311DTF can be used in a variety of applications, including, but not limited to, level control and monitoring, over- and under-voltage protection, precision processing, data communications, and switching logic. It can also be used in precision control systems and in the calibration of measuring equipment. Additionally, due to its low power consumption and low noise levels, the KA311DTF is an ideal choice for battery-powered devices such as portable medical devices, consumer electronics, and industrial automation products.
In summary, the KA311DTF is a versatile and cost-effective linear comparator with a wide range of applications. It is capable of accepting input voltages between -0.3V and +4.9V with a supply voltage of only 3V and has a low power consumption and low noise levels. It is suitable for level control and monitoring, over- and under-voltage protection, data communications, switching logic, precision processing, and calibration of measuring equipment.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
KA319D | ON Semicondu... | 0.37 $ | 2643 | IC COMPARATOR DUAL HS 14-... |
KA311 | ON Semicondu... | -- | 1000 | IC COMPARATOR SINGLE 8-DI... |
KA311DTF | ON Semicondu... | -- | 1000 | IC COMPARATOR SINGLE 8-SO... |
KA317MRTF | ON Semicondu... | -- | 1000 | IC REG LIN POS ADJ 500MA ... |
KA317TU | ON Semicondu... | -- | 1000 | IC REG LIN POS ADJ 1.5A T... |
KA317MTU | ON Semicondu... | -- | 1000 | IC REG LIN POS ADJ 500MA ... |
KA317 | ON Semicondu... | -- | 1000 | IC REG LIN POS ADJ 1.5A T... |
KA317LZTF | ON Semicondu... | 0.0 $ | 1000 | IC REG LIN POS ADJ 100MA ... |
KA317LZBU | ON Semicondu... | 0.0 $ | 1000 | IC REG LIN POS ADJ 100MA ... |
KA317MRTM | ON Semicondu... | -- | 1000 | IC REG LINEAR POS ADJ 500... |
KA317LZTA | ON Semicondu... | -- | 1000 | IC REG LIN POS ADJ 100MA ... |
IC COMPARATOR QUAD 16SOICComparator with...
IC COMPARATOR REF P-P SC70-5Comparator G...
IC COMPARATOR DUAL ECL 20-PLCCComparator...
IC COMP SNGL 4NS ULTRFAST 8-MSOPComparat...
IC COMPARATOR RSCML 16QFNComparator Gene...
IC COMP DUAL LOW PWR W/REF 8SOICComparat...