KA317MRTF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The KA317MRTF is a linear voltage regulator from the PMIC (power management IC) family. Specifically, it is a 3-terminal adjustable voltage regulator, capable of outputting a voltage between 1.2V to 37V. It is a low-cost, highly efficient device that makes it suitable for many applications, including automotive and industrial applications.

The KA317MRTF can be used to reduce the output of a higher voltage input source, such as an automobile’s 12V, 24V, and 48V power sources, to a desired output voltage, such as 5V, where an electronic device could potentially benefit from the lower voltages. On the other hand, the KA317MRTF can also be used to step up the voltage of a lower voltage input source, such as a solar panel’s output, to a higher voltage, such as 10V, where the higher voltage is required to power a given device.

Working Principle

The KA317MRTF is an adjustable voltage regulator, designed to accept an input voltage, which is then regulated to a desired output voltage. This is done by using a series of passive components, principally a pass transistor and an error amplifier, which allow for the regulator to operate in what is referred to as the ‘regulator loop’. In a typical regulator loop, a reference voltage source is set at one end, and the output voltage is set at the other.

The error amplifier is responsible for detecting any difference between the reference voltage and the output voltage, and amplifying the difference. This amplified difference acts as the controlling signal for the control element, that is, the pass transistor. The pass transistor operates as a switch, and is responsible for regulating the output voltage. As such, if the output voltage is higher than the reference voltage, the pass transistor would increase the resistance of the circuit, thus reducing the output voltage. Conversely, if the output voltage is lower than the reference voltage, the pass transistor would decrease the resistance of the circuit, thus raising the output voltage.

The KA317MRTF can also be adjusted and combined with other components to essentially fine-tune the output voltage. The adjustment is done using either onboard or external potentiometers, which essentially allow for fine adjustments to the reference voltage. Additionally, the KA317MRTF can also be combined with emitter-coupled pairs to further increase or reduce the output voltage, depending on the application requirement.

Applications

The KA317MRTF is suitable for a wide range of applications, including automotive and industrial applications. Due to its high efficiency and low-cost, it is often seen in automotive applications, especially in the modern age of electric vehicles. It is also seen in many industrial applications, notably in adjustable power supplies, voltage regulation circuits, and even motor speed controls.

In automotive applications, the KA317MRTF can be used to reduce a higher input voltage, such as 12V or 24V, to a lower output voltage, such as 5V. For example, if a 12V input is required for a device but the device does not have a 12V input, a KA317MRTF could be used to step down the 12V voltage to 5V. Similarly, the KA317MRTF can also be used to step up a lower input voltage, such as from a solar panel, to a higher output voltage, such as 10V. In addition to voltage regulation, the device can also be used to protect circuits from overvoltage and undervoltage.

In industrial applications, the KA317MRTF is commonly used in adjustable power supplies, as an adjustable voltage regulator. The device can be used to set any desired output voltage within its range, and adjust it if needed. It can also be used in motor speed control circuits, where the voltage needs to be adjusted to achieve the desired motor speed. Finally, the device can also be used in voltage protection circuits, as it is capable of detecting when the input or output voltage is too low or too high, and shut off the power accordingly.

Conclusion

The KA317MRTF is an adjustable linear voltage regulator from the PMIC (power management IC) family. It is a low-cost, highly efficient device capable of outputting an adjustable voltage from 1.2V to 37V. The device is commonly used in automotive and industrial applications, such as in adjustable power supplies, voltage regulation circuits, motor speed control circuits, and voltage protection circuits.

The specific data is subject to PDF, and the above content is for reference