KBP06ML-6836E4/72

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	600V
Current - Average Rectified (Io):	1.5A
Voltage - Forward (Vf) (Max) @ If:	1.3V @ 1.57A
Current - Reverse Leakage @ Vr:	5µA @ 600V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-SIP, KBPM
Supplier Device Package:	KBPM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Introduction

Diodes - Bridge Rectifiers are power devices that convet AC input voltage to DC output voltage using thyristors, diodes and SCRs. KBP06ML-6836E4/72 is such a product in this technology and is one kind of bridge rectifier. KBP06ML-6836E4/72 differs from other bridge rectifiers because it is designed to act as a switch for low-power switching applications. By employing the newly developed technology, KBP06ML-6836E4/72 can provide higher efficiency, better dynamic response and improved commutation loss.

KBP06ML-6836E4/72 Application

KBP06ML-6836E4/72 has been designed for use in a variety of electronic equipment including computers, electronic circuits, multimedia systems and DC/DC converters. The device is also suitable for use in printed circuit board (PCB) assemblies, LED lighting and LED display panels. It can also be used in automotive and other industrial applications.The device has an adjustable current range of 1.5mA to 12A and is suitable for applications using devices like IGBTs and SCRs. The device can also be used as part of a circuit to control a bridge rectifier, allowing instant control of the AC to DC conversion process by adjusting the current level.

KBP06ML-6836E4/72 Working Principle

KBP06ML-6836E4/72 is based on a three-phase bridge rectifier circuit. In a conventional bridge rectifier circuit, it requires four diodes or thyristor switches to perform rectification: two for rectifying the AC to DC and two for blocking the DC to AC.The KBP06ML-6836E4/72 uses a single thyristor switch to perform both steps. This reduces the overall circuit complexity and improves device performance by eliminating the need for separate diodes or thyristor switches. The thyristor switch is controlled by voltage-mode driver circuit which is controlled by a waveform generator IP. The waveform generator IP generates pulse-width modulated pulses which control the switching of the thyristor switch, allowing the bridge rectifier circuit to be activated or deactivated.

Conclusion

KBP06ML-6836E4/72 is a bridge rectifier designed specifically for low-power switching applications. The device has an adjustable current range of up to 12A, which allows for precise control of the power output. The device is based on a three-phase bridge rectifier circuit and is controlled by a waveform generator IP. The device is suitable for use in a variety of applications, including computers, multimedia systems, DC/DC converters and automotive and industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description