Allicdata Part #: | KEM480ULY/R-N-ND |
Manufacturer Part#: |
KEM480UL Y/R-N |
Price: | $ 113.66 |
Product Category: | Uncategorized |
Manufacturer: | Altech Corporation |
Short Description: | ENCLOSED DISC SWITCH 4P 80A600VY |
More Detail: | N/A |
DataSheet: | KEM480UL Y/R-N Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 103.32600 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
KEM480UL Y/R-N is a vertical cold roll forming machine designed for the production of sheet metal blanks with I, U and H profiles.
This machine is essentially composed of an uncoiler, a coil accumulation table, a straightening unit, and several actuator-controlled transverse and longitudinal-distribution systems. These systems are driven by a servo motor and a touch screen. The transverse distribution system allows for a full adjustment of the width of the blank, while the longitudinal distribution system applies an additional single roll straightening. These systems help to guarantee the highest quality of sheet metal blanks.
The KEM480UL Y/R-N is mainly used in the automotive industry and other industries. It is mostly used for making parts such as light fixtures, automobile chassis, floors, and roofs. In addition, this machine is also used for the manufacture of all types of automotive trims, seals, and occasionally metal parts. The machine is also used in the production of motorboat boat parts, sheet metal components, warehousing goods, and similar products.
In regards to the working principle, the KEM480UL Y/R-N is a vertical cold roll forming process, consisting of several steps. The first step is the coil feeding which is done by the uncoiler. The coils are then stored on the coil accumulation table. The second step is the straightening of the sheet metal blanks which is achieved with the help of the servo motor and the touch screen. Then, the third step is the transverse and longitudinal distribution which is done by the respective distribution systems.
The fourth step is the roll forming of the sheet metal blanks. After this, the sheet metal blanks are cut according to the desired length of the blanks, and then lastly the blanks are uncoiled by the uncoiler and placed in the storage rack. At this point, the blanks are ready for further processing.
In conclusion, the KEM480UL Y/R-N is designed for the production of sheet metal blanks with I, U and H profiles. It is mainly used in the automotive industry and other industries for making parts such as light fixtures, car chassis, floors, and roofs. Its working principle consists of several steps such as coil feeding, straightening, distribution, roll forming, and uncoiling.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
KEM4SD | Knowles Volt... | 17.52 $ | 1000 | CAP AIR TRIMMER0.5 ~ 4pF ... |
KEM4HV | Knowles Volt... | 21.09 $ | 1000 | CAP AIR TRIMMER0.5 ~ 4pF ... |
KEM4100L Y/R | Altech Corpo... | 249.83 $ | 1000 | ENCLOSED DISC SWITCH 4P 1... |
KEM4125L | Altech Corpo... | 263.78 $ | 1000 | ENCLOSED DISC SWITCH 4P 1... |
KEM4125L Y/R | Altech Corpo... | 263.78 $ | 1000 | ENCLOSED DISC SWITCH 4P 1... |
KEM425UL Y/R | Altech Corpo... | 66.86 $ | 1000 | ENCLOSED DISC SWITCH 4P 2... |
KEM440UL Y/R | Altech Corpo... | 69.27 $ | 1000 | ENCLOSED DISC SWITCH 4P 4... |
KEM416UL Y/R | Altech Corpo... | 70.09 $ | 1000 | ENCLOSED DISC SWITCH 4P 1... |
KEM460UL Y/R | Altech Corpo... | 84.07 $ | 1000 | ENCLOSED DISC SWITCH 4P 6... |
KEM480UL Y/R | Altech Corpo... | 113.66 $ | 1000 | ENCLOSED DISC SWITCH 4P 8... |
KEM480UL Y/R-N | Altech Corpo... | 113.66 $ | 1000 | ENCLOSED DISC SWITCH 4P 8... |
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE