L2006D5TP

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Triac Type:	Logic - Sensitive Gate
Voltage - Off State:	200V
Current - On State (It (RMS)) (Max):	6A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	50A, 60A
Current - Gate Trigger (Igt) (Max):	5mA
Current - Hold (Ih) (Max):	10mA
Configuration:	Single
Operating Temperature:	-40°C ~ 110°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package:	TO-252, (D-Pak)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Thyristors-TRIACsThyristors-TRIACs are solid-state electrical switches that are typically used to control large power loads such as motors, solenoids, or other electrical loads. Unlike conventional switches, thyristors-triacs are able to switch current bi-directionally in response to control signals and can remain in either the on or off state until the control signal is changed.This makes thyristors-triacs ideal for medium- and high-power applications where high levels of control are needed. The triggering signals can typically be provided by low-power electronic circuitry, allowing the operator to control a much larger power load without the need for bulky and costly mechanical switches.L2006D5TP Application Field and Working PrincipleThe L2006D5TP is a Thyristor-TRIAC module manufactured by Littelfuse. It is used to regulate high-power AC and DC devices, such as motors, solenoids, and other large loads. It is an ideal solution for applications where the control signal requires both on and off control of the devices.The L2006D5TP is engineered to allow for up to 5A of current to be switched in both directions. It features reverse voltage protection, which allows the module to remain in the off state even when voltage is applied in the reverse direction. Additionally, the L2006D5TP offers over-voltage protection and is designed to withstand temperatures up to +90°C.The working principle of the L2006D5TP is relatively simple. When a small trigger voltage is applied, the Thyristor-TRIAC module switches on, allowing for full current to flow between the two pins. When the current flow reaches a predefined level, the module switches off automatically, and the load is removed from the circuit. The module can be switched back on by reapplying the small trigger voltage.In summary, the L2006D5TP is an ideal solution for medium- and high-power applications that require on/off control of electrical loads. Its reverse voltage protection and over-voltage protection make it a reliable and robust solution for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description