L4004F51

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs are semiconductor devices which are commonly used as AC switches. The L4004F51 is a 400 Amp device with a surge current capability of 4000 Amps. This device has a high gate trigger current capability and is available in a TO-220AB and a TO-3 package. It is suitable for inductive loads, heaters, electric motors and resistive loads.

The L4004F51 is a three terminal semiconductor switch which is controlled by a gate signal. It consists of two thyristors joined together with their gates connected in parallel. When the gate signal is applied, a current flows in both directions and the device begins to conduct. This allows control of the current in both directions in an AC circuit. When the gate voltage is removed, the device stops conducting and the current falls back to zero.

The advantage of using an L4004F51 over a conventional switch is that it can be used to control AC circuits with a much higher current rating than a regular switch. This is especially beneficial for inductive loads as the voltage across the switch does not need to be as high as with a regular switch. Additionally, the L4004F51 has a much faster response time than a regular switch, allowing it to switch currents more quickly.

The working principle of the L4004F51 is similar to that of a normal thyristor. When a gate signal is applied, it causes a voltage drop across the SCR and it starts conducting. The current then flows through the device and is controlled by the gate signal. When the gate signal is removed, the current will stop flowing and the device will cease to conduct.

The L4004F51 can be used in a variety of applications. It can be used to control large resistive and inductive loads, as well as in electric motors and other AC-powered applications. The device is ideal for switching a high current in both directions and is especially suited for applications which require a high-power trigger signal.

When using an L4004F51, it is important to ensure that the gate signal is powerful enough to trigger the device and that the current flow is not too high. Excessive current can cause excess heat to build up and damage the device. Additionally, the L4004F51 should not be used in a high-humidity environment, as this could lead to leakage current and interference with the device’s operation.

The L4004F51 is a versatile device which is well suited for controlling high-power AC circuits. It is easy to install, thanks to its small size and works reliably when used correctly. It is a popular choice for applications which require precise and reliable control of AC circuits with a high current rating.

The specific data is subject to PDF, and the above content is for reference