Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Triac Type:	Logic - Sensitive Gate
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	6A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	50A, 60A
Current - Gate Trigger (Igt) (Max):	5mA
Current - Hold (Ih) (Max):	10mA
Configuration:	Single
Operating Temperature:	-40°C ~ 110°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package:	TO-252, (D-Pak)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs

A TRIAC is a three terminal, bidirectional, two-junction semiconductor device used to control current or voltage in applications involving AC circuits. The term TRIAC stands for “Triode for Alternating Current.” It is a form of thyristor (or Silicon Controlled Rectifier) which is capable of conducting in both directions. It is essentially two SCRs connected inversely, one of which blocks the other when the gate is off and one of which blocks when the gate is on. The main difference between a regular thyristor and a TRIAC is that a TRIAC is bidirectional, while a regular thyristor is unidirectional.

L6006D6RP Application Field and Working Principle

The L6006D6RP is a bidirectional TRIAC switch designed for applications involving AC circuits. It can be used for switching and controlling the flow of current or voltage in AC circuits, for example in motor control applications or for general AC load control. It is designed to be used in high-efficiency, high power and high reliability applications, and has a wide operating temperature range of -55˚C to +125˚C.The L6006D6RP works by triggering the gate pin to turn the device on, which turns the other two pins (drain and source) into conducting mode. The device will remain in this state until the gate pin is triggered again, at which point the device will turn off. This switching action can also be repeated and can be used for switching applications in AC circuits.To control the flow of current or voltage, a resistor is connected in series with the gate pin. When the gate pin is triggered, the TRIAC will turn on and the current or voltage will pass through the resistor, thus controlling the flow of current or voltage. This allows the user to control the switch through the gate pin, giving it precise control over the current or voltage.The L6006D6RP is suitable for applications requiring high power and reliability. It is also capable of handling higher currents than other TRIACs, making it suitable for applications such as motor control. It is also available in a range of packages, making it easy to install in most applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description