Allicdata Part #: | 296-26079-5-ND |
Manufacturer Part#: |
LF411CP |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Texas Instruments |
Short Description: | IC OPAMP JFET 3MHZ 8DIP |
More Detail: | J-FET Amplifier 1 Circuit 8-PDIP |
DataSheet: | LF411CP Datasheet/PDF |
Quantity: | 3131 |
Current - Input Bias: | 50pA |
Base Part Number: | LF411 |
Supplier Device Package: | 8-PDIP |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | 0°C ~ 70°C |
Voltage - Supply, Single/Dual (±): | 7 V ~ 36 V, ±3.5 V ~ 18 V |
Current - Supply: | 2mA |
Voltage - Input Offset: | 800µV |
Series: | -- |
Gain Bandwidth Product: | 3MHz |
Slew Rate: | 13 V/µs |
Output Type: | -- |
Number of Circuits: | 1 |
Amplifier Type: | J-FET |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
LF411CP is an high-precision, low-noise integrated circuit suitable for use in a variety of areas, primarily within the realms of instrumentation, linear amplification, and analog control. Its main use is as an operational amplifier (op-amp) or voltage buffer amplifier.
The LF411CP op-amp is an important component used in the design of instrumentation-level amplifier circuits. Typical applications include the amplification of low-level signals such as strain gages, thermocouples, or optical sensors which require high gain and accuracy. These signals are amplified to the level necessary for feeding monitors, data-loggers, and other instrumentation systems.
When used as a voltage buffer amplifier, the LF411CP provides an isolated voltage source to maintain an isolated power supply, reducing ground loop interference. The LF411CP can also be used to drive AC loads of up to several hundred milliwatts.
The main benefit of the LF411CP over other operational amplifiers is its low noise figure, which is a key factor when measuring low-level signals. It is also a rail-to-rail device, meaning that it can deliver signals with a full range of voltages from rail to rail (0-VCC). This is useful in systems where input voltage range must not be limited by the supply voltage.
The LF411CP consists of two parts: the amplifier and the output stage. The amplifier is an seven-stage, closed-loop amplifier with dc-feedback. The gain of this amplifier is adjustable, ranging from 1V/V to 10V/V. The amplifier also has two high-frequency ports which allow it to be adapted for high-frequency applications.
The output stage consists of two complementary transistors and is designed to drive up to several hundred milliwatts loads. The output current of this stage is adjustable from 0 to 10mA. The transistors are designed to ensure good power management and thermal stability.
The LF411CP uses a minimum number of external components which makes it suitable for use in small, low-cost solutions. In addition, the LF411CP is available in a variety of packages including SO-8, plastic DIP, and ceramic DIP.
In summary, the LF411CP is a high-precision low-noise linear amplifier suitable for a variety of applications in instrumentation, linear amplification, and analog control. Its low-noise figure and wide voltage range make it ideal for measurement of low-level signals, while its output stage provides the necessary drive to support AC loads. Furthermore, its small form factor and ability to be adapted for high-frequency applications ensure its use in a range of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
LF412CDRE4 | Texas Instru... | 0.36 $ | 1000 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF412CDRG4 | Texas Instru... | -- | 1000 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF411CDRG4 | Texas Instru... | 0.39 $ | 1000 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF412MH | Texas Instru... | -- | 1000 | IC OPAMP JFET 4MHZ TO99J-... |
LF411ACH/NOPB | Texas Instru... | 0.0 $ | 1000 | IC OPAMP JFET 4MHZ TO99-8... |
LF412CDR | Texas Instru... | -- | 156 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF412CN/NOPB | Texas Instru... | -- | 11450 | IC OPAMP JFET 4MHZ 8DIPJ-... |
LF412ACN/NOPB | Texas Instru... | 3.07 $ | 2055 | IC OPAMP JFET 4MHZ 8DIPJ-... |
LF412CP | Texas Instru... | 0.99 $ | 703 | IC OPAMP JFET 3MHZ 8DIPJ-... |
LF412CD | Texas Instru... | -- | 1083 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF411CD | Texas Instru... | 1.09 $ | 3663 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF411CP | Texas Instru... | -- | 3131 | IC OPAMP JFET 3MHZ 8DIPJ-... |
LF411ACN | Texas Instru... | -- | 1000 | IC OPAMP JFET 4MHZ 8DIPJ-... |
LF412ACN | Texas Instru... | -- | 1000 | IC OPAMP JFET 4MHZ 8DIPJ-... |
LF412CN | Texas Instru... | -- | 130 | IC OPAMP JFET 4MHZ 8DIPJ-... |
LF411CN | Texas Instru... | -- | 1000 | IC OPAMP JFET 4MHZ 8DIPJ-... |
SM06-LF41 | Omron Automa... | 25.15 $ | 1000 | SM06-LF41, LED GRN/FLASHI... |
LF412MH/NOPB | Texas Instru... | -- | 530 | IC OPAMP JFET 4MHZ TO99J-... |
LF411CDR | Texas Instru... | -- | 1000 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF412 MWC | Texas Instru... | 0.56 $ | 1000 | IC OP AMP JFET 4MHZ WAFER... |
LF412CPG4 | Texas Instru... | 0.57 $ | 1000 | IC OPAMP JFET 3MHZ 8DIPJ-... |
LF412CDE4 | Texas Instru... | 0.6 $ | 1000 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF412CDG4 | Texas Instru... | 0.6 $ | 1000 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF411CN/NOPB | Texas Instru... | 0.61 $ | 1000 | IC OPAMP JFET 4MHZ 8DIPJ-... |
LF411CDG4 | Texas Instru... | 0.62 $ | 1000 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF411ACN/NOPB | Texas Instru... | 0.0 $ | 1000 | IC OPAMP JFET 4MHZ 8DIPJ-... |
LF411CPG4 | Texas Instru... | 0.65 $ | 1000 | IC OPAMP JFET 3MHZ 8DIPJ-... |
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...