LKG1C153MESAAK

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.457" (37.00mm)
Size / Dimension:	0.984" Dia (25.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ Low Frequency:	2.4A @ 120Hz
Applications:	Audio
Ratings:	--
Series:	LKG
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	1000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	16V
Tolerance:	±20%
Capacitance:	15000µF
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a type of capacitor which makes use of an aluminum oxide film which works as a dielectric to provide great capacitance values with few components. They are used in a variety of applications and are found in most electronic circuits. The LKG1C153MESAAK is an aluminum electrolytic capacitor from Murata. It is a high quality, high temperature rated capacitor that is used in a wide range of commercial and industrial applications.This capacitor is a snap-in style, radial lead capacitor that features a rated voltage of 63V. The capacitance value is 15uF, and the operating temperature range is -40°C to 85°C. It has a low tan δ of 0.08 and a high ripple current capability of 3.4A. It is a miniature capacitor, measuring only 7.2mm in diameter and 10.2mm in length. The LKG1C153MESAAK is also designed for use with AC ripple current and is protected against overvoltage.The LKG1C153MESAAK aluminum electrolytic capacitor has a wide range of application areas. It is used in power supplies, motor and solenoid drivers, energy storage systems, UPS systems, HVAC systems, portable electronics, automotive electronics, and general industrial applications. It is especially useful for applications where a high capacitance-to-volume ratio is desired.The working principle of the LKG1C153MESAAK aluminum electrolytic capacitor is based on the principles of electrostatics. An electric field exists between two electrodes (the anode and the cathode) which is strong enough to store charge. This charge is stored in the thin oxide layer of the anode and the dielectric medium of the capacitor. The amount of charge stored in the capacitor depends on the electrical field and the capacitance of the device. Over time, the stored charge will start to leak out due to the internal resistance of the device, which is why aluminum electrolytic capacitors need to be replaced periodically.When a voltage is applied to the LKG1C153MESAAK aluminum electrolytic capacitor, it will charge up to equal the applied voltage across its terminals. The "burn-in" time is usually longer than for other types of capacitors and will vary depending on the voltage applied. During the charging and discharging cycles, energy is stored in the form of an electric field between the electrodes. This energy is used to provide power to the circuit.In conclusion, the LKG1C153MESAAK aluminum electrolytic capacitor is a high-quality capacitor suitable for a variety of applications. It is a snap-in radial lead capacitor with a rated voltage of 63V, a capacitance of 15uF and an operating temperature range of -40°C to 85°C. It is widely used in power supplies, motor and solenoid drivers, energy storage systems, HVAC systems, and many other commercial and industrial applications. Its working principle is based on the principles of electrostatics, where charge is stored in the oxide layer of the anode and the dielectric medium of the capacitor. Over time, the stored charge will start to leak out due to the internal resistance of the device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description