LLS2C681MELY

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

LLS2C681MELY capacitors are aluminum electrolytic capacitors, otherwise known as a "wet" capacitor because they use an electrolytic chemical as an insulating medium. These capacitors are unique since they can store a larger amount of charge than other types of capacitors and come in a variety of shapes, sizes, and capacities.

Application Field

Aluminum Electrolytic Capacitors are often used in power supplies, for direct current (DC) applications, for radio frequency (RF) applications, and in analog circuits. Additionally , they are also used to monitor voltage on both AC and DC electrical systems and to facilitate the transfer of energy from one circuit to another.

In AC and DC electrical circuits, electrolytic capacitors are usually used in filtered and regulated power supplies to keep the output clean and stable throughout the operating voltage range. In some power supplies, the capacitors are used to help eliminate high-frequency ripples that can be caused by a high-current load. In radio-frequency (RF) applications, the electrolytic capacitors allow high power circuits to operate well and deliver the required output reliably.

In analog systems, electrolytic capacitors are often used for signal coupling, filtering, and decoupling. This is done to ensure that the signal has a minimum variation in amplitude, thus preventing any phase shifting that would make it difficult to interpret the signal and use it for a meaningful purpose. Furthermore, electrolytic capacitors are used to provide a specific value of capacitance in amplifiers, oscillators, and filters to adjust the frequency of the signal and control its gain.

Working Principle

Aluminum electrolytic capacitors work on the principle of storing and releasing electrical energy by the physical change of an electrolytic solution. The most important components of an electrolytic capacitor are the two metal plates and a dielectric. The metal plates are the positive and negative poles and the dielectric is the insulating medium between the two plates. When a voltage is applied to the electrolytic capacitor, an electric current flow is established which causes the ions in the electrolyte to form a compact metallic layer on the plates.

The amount of charge stored in the electrolytic capacitor is dependent on the size of the plates and the thickness of its dielectric. A thicker dielectric will allow more current to pass through and will therefore store more charge. In addition, the larger the plate size, the more charge the capacitor will be able to store.

The charging and discharging of the electrolytic capacitor is dependent on the frequency of the applied voltage. Low-frequency signals have a longer charging and discharging time, while high-frequency signals have a much shorter charging and discharging time. The frequency will also affect the amount of charge that can be stored: low-frequency signals can store a larger amount of charge than high-frequency signals.

Electrolytic capacitors are also used as energy storage devices, as they are able to hold a charge for a long period of time when not in use. This makes them ideal for applications where a temporary source of energy is needed, such as in emergency lighting or portable electronics.

Overall, LLS2C681MELY capacitors are a type of aluminum electrolytic capacitor and are used in a variety of applications. They are able to store a larger amount of charge than other types of capacitors and come in a variety of shapes, sizes, and capacities. The amount of charge they are able to store is dependent on the size of the plate and the thickness of the dielectric. Additionally, they are used as energy storage devices and in AC and DC circuits to regulate voltage.

The specific data is subject to PDF, and the above content is for reference