LM2608ATLX-1.8/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LM2608ATLX-1.8/NOPB is a voltage regulator belonging to the family of DC/DC switching regulators. It is usually used to evaluate the performance of PMIC (Power Management IC) Regulators. Such regulators are designed to convert the input voltage applied to the device into the desired voltage level. In order to achieve better efficiencies, DC/DC switching regulators use two main conversion methods.

The LM2608ATLX-1.8/NOPB is an example of a voltage regulator using a buck topology and is ideally suited for low input voltage applications. The buck topology works by using an oscillator to control the switch which rapidly shuts off and resumes the current flow from the input voltage to the load according to a predetermined duty cycle. Since the current only has to flow for a part of the cycle, lesser amount of power is lost and higher levels of efficiency are achieved.

The LM2608ATLX-1.8/NOPB has a wide input voltage range of 1.8V to 32V making it suitable for a variety of applications. It also has an adjustable output voltage up to approximately 28V though users must ensure they do not exceed their boards maximum recommended voltage levels. The maximum power the LM2608ATLX-1.8/NOPB can provide is 8W when the output is 1A and the input voltage is 12V.

The LM2608ATLX-1.8/NOPB is further protected with built-in Low Drop Out (LDO) regulators which control the output voltage and current during critical conditions. It also contains fault-detection circuitry which will shut down the output voltage whenever the voltage or current exceed their respective safe limits. This is especially important as exceeding these values may damage the equipment.

The LM2608ATLX-1.8/NOPB is typically used in Automotive, Medical, and Aerospace applications. In Automotive applications, it is used to control the voltage supplied to the vehicle’s ECU or Engine Control Unit. In aerospace applications, it is used to control the voltage supplied to the communication and navigation systems. In medical applications, it can be used to control the voltage supplied to medical equipment.

In summary, the LM2608ATLX-1.8/NOPB is a voltage regulator belonging to the family of DC/DC switching regulators. It is suitable for a variety of applications and its wide input voltage range makes it ideal for use in low voltage devices. The built-in LDO regulators and the fault-detection circuitry further protect the device from any potential damage due to excessive current or voltage. The LM2608ATLX-1.8/NOPB is used in a variety of applications such as Automotive, Medical, and Aerospace.

The specific data is subject to PDF, and the above content is for reference