LM2734ZQSD/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LM2734ZQSD/NOPB is an integrated, low quiescent current, high efficiency, synchronous buck voltage regulator, capable of replacing linear regulators and low efficiency switch mode power supplies (SMPSs) used in a variety of applications. It is designed to operate as a high current output supply with a minimum of external components and a very compact form factor. The device can operate from a wide input voltage range and is capable of providing up to 8A of continuous output current.

The LM2734ZQSD/NOPB is a voltage regulator from the PMIC (Power Management Integrated Ciruit) family, specially designed for DC to DC switching applications. It integrates features such as under-voltage lockout (UVLO) protection, short circuit protection, over-voltage protection and thermal protection. The integrated synchronous rectifier improves efficiency by eliminating the need for an external Schottky diode and its losses.

Working Principle: In its most basic form, a voltage regulator is an active device that controls the output voltage of a power supply circuit. Essentially, it employs an active component, such as a transistor or an op amp, to control the current flow between its inputs and outputs. The LM2734ZQSD/NOPB voltage regulator is no exception. It uses an advanced buck topology to convert a wide input voltage range into a desired, predetermined output voltage. The integrated synchronous rectifier enables it to work with high efficiency and low quiescent current.

The buck topology is the most basic type of DC to DC switching regulator, which works by switching the semiconductor between its on and off state. The switcher is connected in series with the output voltage of the device and chops up the input into repeating switching pulses. The output voltage is then created due to the continuous on and off state of the switching device, whose duty cycle is adjusted in order to obtain the desired output voltage. In other words, the voltage regulator acts like an electronic switch, where the on-time of the switch determines the output voltage.

The LM2734ZQSD/NOPB includes an on-board voltage reference circuit which allows the device to regulate its output voltage according to a predetermined reference. In addition, the device is regulated by an internal error amplifier, which uses a feedback loop to adjust the output voltage according to the reference voltage. This ensures that the voltage regulator maintains its desired output voltage, which is usually set using external resistors.

The LM2734ZQSD/NOPB also includes under-voltage lockout (UVLO), short circuit protection and over-voltage protection. The UVLO prevents the device from operating if the input voltage falls below its operating range, safeguarding both the device and the load from damage due to a low input voltage. The short circuit protection prevents the device from operating in case of a short circuit on the output. The over-voltage protection prevents the device from exceeding its maximum output voltage, which can damage the device and the load.

Overall, the LM2734ZQSD/NOPB is a highly integrated, efficient and cost-effective synchronous buck voltage regulator, capable of replacing linear regulators and low-efficiency SMPSs in various applications. It is capable of providing up to 8A of continuous output current and is designed to operate with a wide input voltage range. The device also integrates several protection mechanisms, such as under-voltage lockout, short circuit protection and over-voltage protection, to safeguard the device and the load.

The specific data is subject to PDF, and the above content is for reference