LM27762DSST

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Describe

The LM27762DSST provides very low noise positive and Negative Output Adjustable Between ±1.5 V and ±5 V. The input voltage range is 2.7 V to 5.5 V, Output current up to ±250 mA. with Operating current is only 390 µA and 0.5 µA (typ) shutdown current, the LM27762 provides the ideal Power amplifier and DAC bias performance and Other high current, low noise negative voltage requirements. The device provides a small solution size with almost no external components. Negative voltage is generated by the regulator Inverting charge pump followed by a low noise Negative LDO. inverting charge pump The LM27762 device operates at 2MHz (typ) switching frequency to reduce output resistance and voltage ripple. positive voltage is generated from Input from a low noise positive LDO. The positive and negative outputs of the LM27762 have Dedicated enable input. These outputs support Independent Timing of Positive and Negative Rails For specific system power sequence requirements. enable The inputs can also be shorted together and connected to Input voltage. The LM27762 has an optional Power good function.

2. Feature

    1. Generates low noise adjustable positive supply voltage between 1.5 V and 5 V and negative supply voltage between –1.5 V and –5 V

    2. Input voltage range 2.7 V to 5.5 V

    3. ±250mA output current

    4. Inverting charge pump followed by negative LDO

    5. 2MHz low noise fixed frequency operation

    6. 2.5Ω inverter output impedance, VIN = 5V

    7. 30 mV negative LDO dropout at 100 mA, VOUT = –5 V

    8. Positive LDO with 45mV dropout at 100mA, VOUT = 5V

    9. 390µA Quiescent Current (typ)

  10. Shutdown quiescent current of 0.5 µA (typ)

  11. Current limit and thermal protection

  12. Power good pin (active low)

  13. Create custom designs using LM27762 and WEBENCH® Power Designer

3. Application

    1. High Definition Audio Headphone Amplifier

    2. Op amp power bias

    3. Powering data converters

    4. Wireless communication system

    5. Interface power

    6. Handheld instruments

4. Pin configuration

5. Pin Description

6. Application Information

The LM27762DSST input voltage range is from 2.7 V to 5.5 V. The positive LDO provides a positive voltage configurable with external gain setting resistors R1, R2 . The low-noise charge-pump voltage converter inverts the input voltage V to a negative output voltage. Charge pump is followed by the negative LDO which regulates a negative output voltage configurable with external