LM339DT Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LM339DT is a linear comparator integrated circuit. It is an ideal choice for design engineers, especially those dealing with low power applications. It is an open drain comparator that can be used in a wide range of applications, including voltage level sensing, current overload protection and digital caliper transducers.

This device is a dual CMOS device, consisting of two independent comparator circuits. Each comparator has a low input current of 0.5 µA and can operate at low power levels of a few mW. The outputs of both comparators are active low open drain. This type of device is suitable for use with a pull-up resistor for direct logic interfacing.

The LM339DT employs an internal hysteresis to reduce the sensitivity of oscillations that occur during comparator operation. This internal hysteresis is designed to prevent the output from reverting to an inactive conduction state if the comparator output is oscillating. A hi-speed response of less than 5 us makes it suitable for use in systems where maximum speed is required.

The LM339DT has several other features, including low input and output capacitance, low output voltage, low power, and the ability to drive TTL loads. It also provides excellent temperature stability characteristics. Furthermore, the comparator operates over a wide temperature range of -40 to +85°C.

In a linear comparator, the comparator compares two voltages, Vref and Vin, and decides whether Vref is higher or lower than Vin. This comparison is done by adjusting the state of the output pin. If Vref is higher than Vin then the output will be at high state (1) and the comparator has been said active. On the other hand, if the Vref is lower than Vin then the output will be at low state (0) and the comparator has been said inactive.

When the outputs of both comparators, A and B, are high, the LM339DT will be in the active state. Furthermore, when the difference of the two comparator outputs exceeds the internal hysteresis value, the LM339DT will be in the inactive state. The hysteresis of the LM339DT is dependent on the value of the external resistor connected to the hysteresis pin.

The application field of LM339DT is wide and flexible. It can be used as an analog switch, as an input signal sensing device, for over voltage protection and for fault detection in systems. Besides, this device can also be used for testing of electromagnetic compatibility, linear calibration and for level detection in digital calipers.

In conclusion, the LM339DT is an ideal choice for design engineers, especially those dealing with low power applications. It has a low power consumption, low input current, hysteresis feature, excellent temperature stability and TTL load compatibility. Furthermore, its wide temperature range makes it suitable for use in harsh environmental conditions. Finally, it can be used in a wide range of applications, including voltage level sensing, current overload protection and digital caliper transducers.

The specific data is subject to PDF, and the above content is for reference