LM3447MTX/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LED drivers are a type of power management integrated circuits (PMICs) that allow manufacturers to produce dimmable products. To achieve this, the PMICs reduce power consumption and increase the efficiency of the LEDs, thus allowing for the creation of devices that use less energy and are more energy-efficient. The LM3447MTX/NOPB is a popular LED driver, and by understanding its application field and working principle, we can better understand its value to LED applications.

Application field

The LM3447MTX/NOPB is designed for a variety of LED applications. It is suitable for LED boards, LED lamps, LED lighting, LED decorative lighting, and LED strips. The device offers various features like built-in safety and protection, which makes it perfect for consumer electronic applications. It also satisfies various requirements of the consumer electronics industry, such as flicker compliance, dimming capability, and compliance with IEC60959-1.

The LM3447MTX/NOPB is a low-noise, efficient driver with soft start, overvoltage and short circuit protection. It has an adjustable output current from 4mA to 40mA, which can extend the lifetime of the LEDs. The device also has a constant current output over a wide input voltage range of 4.5V to 36V. Other features include a very low maximum operating quiescent current of 5µA, adjustable PWM dimming and adjustable dimming frequency. With all these features, the LM3447MTX/NOPB is one of the best choices for LED applications.

Working Principle

The LM3447MTX/NOPB is a regulated currentmode step-down DC/DC converter. It can reduces the voltage from the battery or the power supply to the necessary voltage level required by the LEDs. The input voltage is applied to an internally integrated high-side switch, which allows the current to flow from the input to the output. At the same time, the integrated current-sense resistor detects the current flowing through it. As the current reaches the set threshold, the error amplifier compares the signal to the reference voltage. The output of the amplifier is then used to control the duty cycle of the integrated high-side switch.

The frequency of the regulator is set by connecting a resistor or capacitor to the FREQ pin. When the frequency is set to lower levels, the energy wasted in the switching components is reduced. The output voltage is controlled using a voltage reference. The LM3447MTX/NOPB has an internal compensation circuit to adjust the loop stability. The output voltage of the device is also protected by an undervoltage lockout and an overvoltage protection (OVP) circuit.

The LM3447MTX/NOPB is an ideal LED driver for LED applications. With its combination of features and functionality, it can ensure a long lifetime and consistent performance of LED devices.

The specific data is subject to PDF, and the above content is for reference