LMP8480ATQDGKRQ1

Series:	Automotive, AEC-Q100
Packaging:	Tape & Reel (TR)
Part Status:	Active
Amplifier Type:	Current Sense
Number of Circuits:	1
Output Type:	--
Slew Rate:	1 V/µs
-3db Bandwidth:	270kHz
Current - Input Bias:	6.3µA
Voltage - Input Offset:	80µV
Current - Supply:	88µA
Voltage - Supply, Single/Dual (±):	4.5 V ~ 76 V
Operating Temperature:	-40°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package:	8-VSSOP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LMP8480ATQDGKRQ1 is a low power, low-noise, precision instrumentation amplifier that is specifically designed with a combination of low input offset voltage, low drift, and high CMRR for use within instrumentation, testing, and data acquisition systems. It is a linear integrated circuit, the Amplifiers - Instrumentation, OP Amps, Buffer Amps category.The main features of the LMP8480ATQDGKRQ1 are its small size, low power consumption, and low noise, making it suitable for a variety of portable and mobile applications. It is also able to provide high voltage performance, high accuracy, low input offset voltage, low bias currents, and very low distortions, making it suitable for measurement and control electronics applications.The LMP8480ATQDGKRQ1 is a type of operational amplifier (Op-Amp) with an inherent operational amplifier functionality involving a signal input, an output, two power pins and two power supplies, two feedback elements, and an input scaling factor. The input, output and feedback terminals are connected together to form a closed loop, allowing the amplifier to operate.The LMP8480ATQDGKRQ1 offers excellent linearity and accuracy with common-mode rejection ratio (CMRR) greater than 100 dB. It has very low offset voltage and bias currents, low noise, high input impedance, low distortion levels and very good stability. Its power supply provides a good common-mode range with very good resistive and capacitive transient immunity. The output of the op-amp is determined by the feedback element, which is a passive network of resistors and/or capacitors. This feedback network adjusts the gain of the op-amp or “compensates” the circuit by adding or subtracting voltage or current as needed to keep the output values within the range desired. The voltage or current generated by the feedback element is then added to or subtracted from the input signal, and the resulting output is the amplified version of the signal.In the case of the LMP8480ATQDGKRQ1, the default gain of the amplifier (DC Gain, or dcg) is unity, or 1. This means that the output signal is the same as the signal provided at the input, but it may be amplified with the help of a feedback element. The DC gain will change depending on the type of feedback network and the output of the amplifier. LMP8480ATQDGKRQ1 amplifiers are used in various applications including data acquisition for consumer electronics, medical instrumentation, laboratory testing, robotics, sound imaging and monitoring, and military systems. It can also be used in automotive applications, including airbags, engine control module, power-train control module, and on-board diagnostics. Additionally, its use in audio, where its low distortion levels, low offset voltage and bias currents, and high input resistance make it suitable for use in high-end audio equipment. The working principle of the LMP8480ATQDGKRQ1 follows the same typical amplifier circuit operation. When a signal is applied to the amplifier input, it passes through an input impedance circuit, converting the signal’s voltage to an internal voltage. This voltage is then sent to an operational amplifier’s internal circuitry where the gain is determined by the feedback element and the output is either amplified or attenuated, depending on the type of feedback used. The output voltage is then sent through an output impedance circuit, and converted back to the original signal.Overall, the LMP8480ATQDGKRQ1 provides a low power, low-noise, precision instrumentation amplifier that is well-suited for a number of industrial and consumer applications. Its low input offset voltage, low drift, and high CMRR make it useful for a variety of applications including data acquisition, medical instrumentation, audio, automotive, and military systems. Its accurate linearity and stability, low noise, and high input impedance make it a versatile choice for a variety of portable and mobile applications. The LMP8480ATQDGKRQ1 offers a great way to integrate high performance, low power, and precision into any design.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description