LNR1E104MSEN

Ratings:	--
Package / Case:	Radial, Can - Screw Terminals
Mounting Type:	Chassis Mount
Surface Mount Land Size:	--
Height - Seated (Max):	4.055" (103.00mm)
Size / Dimension:	2.008" Dia (51.00mm)
Lead Spacing:	0.866" (22.00mm)
Ripple Current @ High Frequency:	13.8A @ 10kHz
Ripple Current @ Low Frequency:	12A @ 120Hz
Applications:	General Purpose
Series:	LNR
Polarization:	Polar
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	5000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	25V
Tolerance:	±20%
Capacitance:	100000µF
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum electrolytic capacitors are commonly used in a wide variety of electronic devices due to their robustness, relatively low cost, ease of manufacture, and variability in size and capacitance. The LNR1E104MSEN is an aluminum electrolytic capacitor designed for use in a variety of applications where consistent performance is a must.

Application Fields

The LNR1E104MSEN is designed for use in a variety of general electronic applications including high frequency bypass and low DC voltage applications. These capacitors are used in pulse mode and digital circuits where low ESR, high temperature stability, and endurance are required. Typical uses include power supplies, audio-visual equipment, motor control, servo systems, lighting, and digital circuits. Additionally, these capacitors are appropriate for use in board-level circuit attenuators. As a result, they are well suited for both portable and consumer devices.

Working Principles

An aluminum electrolytic capacitor, such as the LNR1E104MSEN, works on the principle of storing electrical charge between two metal plates separated by an electrolyte. The electrolyte contains a liquid that allows a current to flow between the two electrodes. When a voltage is applied, an electric field is created in the electrolyte, which causes the metal ions in the electrolyte to move to one electrode and the electrons to move to the other. The charging current allows electrons to be transferred from one plate to the other increasing the electric field between the two plates. As the current continues, a charge is stored between the electrodes, creating a capacitance. The LNR1E104MSEN has a capacitance of 100 μF, and a rated voltage of 16 Volts. It also has an ESR of 0.0064 Ω at 100 kHz and a ripple current of 0.8 A rms at 100 °C. The capacitance is relatively low compared to other aluminum electrolytic capacitors, making it ideal for use in low DC voltage applications. The capacitance does not vary significantly with respect to temperature, and it has a wide temperature range of -40°C to +105°C.

Conclusion

The LNR1E104MSEN aluminum electrolytic capacitor is an ideal solution for applications with consistently low DC voltages. Its low ESR, high temperature stability, and wide temperature range make it well suited for use in a variety of applications, such as power supplies, audio-visual equipment, motor control, servo systems, and digital circuits. The 100 μF capacitance provides a lower capacitance value than most other aluminum electrolytic capacitors, which makes it easier to design circuits with the LNR1E104MSEN.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description