LNR1V683MSEB

Ratings:	--
Package / Case:	Radial, Can - Screw Terminals
Mounting Type:	Chassis Mount
Surface Mount Land Size:	--
Height - Seated (Max):	3.268" (83.00mm)
Size / Dimension:	2.008" Dia (51.00mm)
Lead Spacing:	0.866" (22.00mm)
Ripple Current @ High Frequency:	10.695A @ 10kHz
Ripple Current @ Low Frequency:	9.3A @ 120Hz
Applications:	General Purpose
Series:	LNR
Polarization:	Polar
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	5000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	35V
Tolerance:	±20%
Capacitance:	68000µF
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are electrical components that are used to store electrical energy. They are constructed from two or more thin aluminum foils that are separated by a thin non-conductive material called the dielectric. These capacitors can be used for a variety of applications and are available in different types and sizes. The purpose of an aluminum electrolytic capacitor is to act as a reservoir of electrical energy, either for use in AC/DC power supplies or for use in DC-only applications. In a DC-only application, the capacitor stores energy when the DC power supply is off and delivers it back to the power supply when it is turned on. In an AC/DC application, the capacitor stores energy during the negative-polarity portion of each cycle of the AC waveform, and releases it back during the positive-polarity portion. In either case, the capacitor provides a single response to an alternating voltage. One model of aluminum electrolytic capacitor is the LNR1V683MSEB, which is a small, surface-mount electrolytic capacitor. This model has a rated voltage of 6.8V, with a capacitance of 4.3µF (± 10%), and a ripple current of 0.3mA. It also has an operating temperature range of -40 ° to +105 ° Celsius, and a maximum dissipation factor of 1 %. The LNR1V683MSEB is primarily used in DC/DC converters, DC/AC inverters, and other switching power supplies. It provides a direct current that is higher than the rated voltage and helps regulate and filter the load current. In other words, it ensures that the voltage across the load is stable, and that any unwanted noise on the output is filtered out. The working principle of the LNR1V683MSEB is the same as any other aluminum electrolytic capacitor. It works by storing electrical energy in the form of an electric field between the two aluminum foils. This electric field is created by a chemical reaction between the aluminum foils and the electrolyte that is present in the capacitor. When a current passes through the capacitor, it passes through the dielectric material, creating a potential difference between the two aluminum foils. This potential difference then produces an electric field, allowing the capacitor to store energy. The LNR1V683MSEB is a great choice for applications that require high ripple current and a tight tolerance of voltage. It is a reliable and cost-effective solution for designers who need high performance in their DC/DC or other power-supply applications. As with all aluminum electrolytic capacitors, the LNR1V683MSEB can provide the required performance without compromising reliability and cost-effectiveness.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description