LP0603A1747ANTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Filters are electronic systems used in electrical engineering, telecommunications and other applications for filtering out unwanted signals and preventing them from interfering with a desired signal. LP0603A1747ANTR, or Low Pass Filter 0603, is a type of filter designed specifically for use in radio frequency applications. This filter operates by allowing low frequencies to pass through, while attenuating higher frequencies. It is also referred to as an anti-resonance filter.

LP0603A1747ANTR is a surface mount device measuring 0.063 in. x 0.032 in. It is composed of three different components: a piezoelectric filter, an attenuator, and a transformer. The piezoelectric filter allows for high-Q transmission of the desired signal while attenuating unwanted signals. The attenuator is a low-Q resistor network used to reduce the signal magnitude and protect the piezo filter from high input voltages. Lastly, the transformer allows for impedance matching between the input and output ports.

The primary application for the LP0603A1747ANTR filter is in radio frequency (RF) communication systems. These systems often use multiple filter stages to reduce the amplitude of out-of-band and spurious signals. LP0603A1747ANTR is particularly effective in both wireless and wireline communications, particularly in those with radar or satellite communications. Additionally, the filter is used in antenna systems to improve signal quality, reduce cross-talk, and reduce interference from adjacent frequencies.

The working principle of the LP0603A1747ANTR is relatively simple. This filter operates by allowing low frequencies to pass through and attenuating higher frequencies. In other words, high frequency signals are reduced whilst low frequency signals are allowed to pass without significant attenuation. This is achieved by utilizing the piezoelectric filter, attenuator, and transformer components mentioned earlier.

The piezoelectric filter is designed to pass high frequency signals and attenuate low frequency signals. This is possible due to the tuning of the quartz crystals inside the filter to the frequency of the desired signal. The attenuator reduces the magnitude of voltage signals entering the filter as to not overpower the piezo filter. The transformer provides impedance matching between the input and output ports.

In conclusion, the LP0603A1747ANTR filter is a surface mount device measuring 0.063 in. x 0.032 in. It is composed of three different components: a piezoelectric filter, an attenuator, and a transformer. The primary application for this filter is in Radio Frequency (RF) communication systems, and it operates by allowing low frequencies to pass through and attenuating higher frequencies. It is widely used in wireless and wireline communications, antenna systems, and radar or satellite communications to improve signal quality, reduce cross-talk, and reduce interference from adjacent frequencies.

The specific data is subject to PDF, and the above content is for reference