LP8340ILDX-ADJ

Current - Output:	1A
Base Part Number:	LP8340
Supplier Device Package:	6-WSON (2.92x3.29)
Package / Case:	6-WDFN Exposed Pad
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Protection Features:	Over Current, Over Temperature
Control Features:	--
PSRR:	55dB (120Hz)
Current - Supply (Max):	170µA
Current - Quiescent (Iq):	100µA
Series:	--
Voltage Dropout (Max):	--
Voltage - Output (Max):	9.3V
Voltage - Output (Min/Fixed):	1.25V
Voltage - Input (Max):	10V
Number of Regulators:	1
Output Type:	Adjustable
Output Configuration:	Positive
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LP8340ILDX-ADJ Application Field and Working Principle

LP8340ILDX-ADJ is a linear voltage regulator in the Power Management ICs(PMICs) category. It is designed to protect sensitive electronics such as devices with capacitive loads, sensitive power supplies, etc. It provides a low-dropout voltage with low thermal impedance, which allows it to be used in many different applications.The LP8340ILDX-ADJ is designed to provide an adjustable output voltage range from 1.5V to 8.0V. The device is designed with a low-noise control loop and a logic-controlled shutdown mode. It is capable of delivering up to 1A of continuous output current, with a minimum load current of only 0.1mA. It also features over temperature protection, reverse voltage protection, and over current protection.In terms of its working principle, the LP8340ILDX-ADJ is a linear voltage regulator in which the input voltage is regulated by controlling the output current. This voltage is measured using an adjustable voltage divider, and it then sets the input voltage to the desired output value. When the VM1 pin is set to a low state, the input voltage is equal to the reference voltage plus any load current into the load.The voltage regulator is an open-loop device and requires external components like resistors and capacitors for proper operation. Resistor R1 sets the output voltage and the voltage divider sets the feedback voltage. The values of R1 and C1 are calculated based on the output voltage desired. C2 is used to reduce the noise on the output rail.The LP8340ILDX-ADJ is well-suited for applications like consumer electronics, telecommunications, and other sensitive equipment such as medical and test equipment. It is also suitable for microprocessor and DSP applications.Overall, the LP8340ILDX-ADJ is a highly reliable and cost-effective linear voltage regulator suitable for a variety of applications. It is capable of providing a regulated output voltage with improved thermal performance compared to other regulators. With its low noise and low-dropout characteristics, it is an excellent choice for Motherboard, LAN, and consumer electronics applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description