LQR2G562MSEHBB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors (also known as aluminum electrolyte capacitors, or electrolytic capacitors) are a type of capacitor that uses an electrolyte solution to store electrical charge. It has a greater capacitance per unit volume than any other type of fixed capacitor. This type of capacitor is widely used in electronics equipment due to its high energy density, low cost, and small physical size.

The LQR2G562MSEHBB is a type of aluminum electrolytic capacitor. It is an axial leaded type capacitor, which means that the capacitor has two leads that come out of the side of the capacitor, as opposed to one end which is common for most other types of capacitors.

The LQR2G562MSEHBB has a cathode mark on the positive lead and a black stripe on the negative lead. This allows users to easily identify positive and negative leads on the capacitor. The device is rated with a temperature range of -40 to +85°C, and has a voltage rating of 25 VDC.

The LQR2G562MSEHBB has a maximum capacitance of 560 microfarads, and a temperature coefficient of capacitance (TCC) of -20%. This means that the capacitance decreases as the temperature increases. It also offers high resonance frequency stability, and low ESR (Equivalent Series Resistance).

The most common application of the LQR2G562MSEHBB is for decoupling and bypassing in low frequency digital and analog circuits. Decoupling is used to reduce power supply noise and maintain a constant and stable power supply for the connected circuits. The capacitor provides a low impedance path between the power supply and ground, which helps to reduce power supply noise and improve the performance of the circuits.

Bypassing is used to filter out high frequency signals that may interfere with the operation of the circuit. The capacitor acts like a low pass filter which allows the low frequency signals to pass through while blocking the high frequency signals. This helps to reduce interference between the connected circuits.

The LQR2G562MSEHBB is also suitable for use as a snubber capacitor in power circuits, and can be used in pulse circuits and switching operations. It is also well suited for use in cameras, audio equipment, and in mobile applications.

Working Principle

The working principle of an aluminum electroltic capacitor is based on the fact that aluminum oxide, which is an insulator, forms a barrier between two metallic layers. These metallic layers act as electrodes, providing a conducting path between them. When a potential difference is applied to the capacitor, electric charge is transferred from one electrode to the other, establishing a voltage that is stored between them.

The capacitance of the aluminum electrolytic capacitor is determined by the size of the electrodes and the dielectric between them. The dielectric layer consists of aluminum oxide, which has a relatively high dielectric constant. This means that the aluminum oxide allows a large amount of electrical charge to be stored between the two electrodes.

When the capacitor is connected in an electrical circuit, it acts as a AC and DC filter, allowing only the desired AC and DC signals to pass through while blocking any noise signals. Because of this, aluminum electrolytic capacitors are used in many applications to filter out noise and improve signal integrity.

The specific data is subject to PDF, and the above content is for reference