LT1016IS8#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear - Comparators

The LT1016IS8#TRPBF is a Linear - Comparators device primarily used as a voltage comparator. It features a low supply current of 3.4mA, wide supply voltage range of 3.0V to 40V, open-collector outputs to allow for wired-OR and direct LED drive capabilities, low input offset voltage of 0.3mV, and fast response times of 20ns in both directions. This makes the LT1016IS8#TRPBF usable for a wide range of applications requiring a discrete device for making voltage comparisons, including power supply ORing, current limit/overvoltage protection, reference comparison, and many others.

At its most basic, a Linear - Comparator is a circuit that compares two different voltage levels, often ones that are set by an external value, and then takes a specific action based on the result of the comparison. The LT1016IS8#TRPBF operates similarly and uses an external reference source to provide a voltage comparison. If V_IN is greater than V_REF, the output will be high, else the output will be low, depending upon the part\'s specified polarity logic level. This allows it to be used for a variety of industrial and medical applications, powering devices and measuring thresholds.

One common application of the LT1016IS8#TRPBF is for power supply ORing, where it is directly placed between the power supply’s input and output (V_IN and V_OUT). Using the external reference voltage, it can be used to detect any voltage drop or rise in the power supply. If the power supply experiences even a minor drop or increase above the set reference, the comparator will send an indication via the output pin to a secondary power supply. In this way it can take over from the primary power supply, ensure a stable voltage, and prevent any damage or loss of data caused by a faulty or unstable supply.

The LT1016IS8#TRPBF can also be used for current limit/overvoltage protection, reference comparison, and many other applications requiring a discrete device for making voltage comparisons. It can use a variety of power supplies and it has a low input offset voltage, allowing it to detect small voltage changes. It is also fast with response times of up to 20ns. This makes it useful for applications with fast operations, allowing it to properly react to any changes in voltage.

Overall, the LT1016IS8#TRPBF is a powerful and versatile linear-comparators device. It has a low supply current of 3.4mA, wide supply voltage range of 3.0V to 40V, open-collector outputs to allow for wired-OR and direct LED drive capabilities, low input offset voltage of 0.3mV, and fast response times of 20ns in both directions. Its small and discrete design makes it usable for a huge variety of applications, making it a must for any engineer in search of a reliable voltage comparator.

The specific data is subject to PDF, and the above content is for reference